1. Nylon+ Stainless Steel
2. Used for injecting resin epoxies and coatings in Construction& Concrete
3. CE/OEM is available
Port: shanghai
Minimum Order Quantity: 500 Piece/Pieces
Supply Ability: 100000 Piece/Pieces per Month
Payment Terms: T/T
Contact Supplier
Packaging Detail: Inner packing385mm*200mm*115mmOuter packing630mm*385mm*410mm
Delivery Detail: 15-25days after confirming to get the payment.
Name:490ml 10:1 two-companent caulking gun/ sealant gun/caulking applicator/glue gun/ caulking applicator
DescriptionCG-825-10-1
two-component
caulking gun
Cartridge: 825ml (10:1)
Weight: 1.76kg/piece
Material: Nylon frame, carbonized rod
Packing 10cases/carton
Inner packing385mm×200mm×115mm
Outer packing630mm×385mm×410mm
OEM & ANY COLOUR ACCEPTABLE
Advantage:
1. Low cost: Life duration is 5 times more than iron caulking gun.
2. high-efficiency: The force is up to 270Kg-300kg and save your strength 5 times than common air caulking gun.
3. Brand image: Not only our service of high-quality adhesive, but also high-quality concerned tools, our products are designed it.
How to use caulking gun?
Instructions:
1, Open the swfit of handle and then pull the rack to reach the maximum.
2, Put into two-companent impression material cartridge.
3, Promote the trigger to make the impression material come out smoothly from the cartidge
4, After using, put the rack back to the original location.
5, Remove the cartridge, then to repeat the above operation.
Suggested Use Materials:
Epoxies, Acrylics, Silicones, Polyesters.
Epoxy Acrylates, Hybrids, Urethanes.
Polysulfides, foams, Polymers, polyureas
Model No.: CGI-600
Features: 1.Aluminum body
2. Used for injecting 600ml sausage sealants.
3.It's so easy to operate
4.CE Certificate, OEM are available
Model No.: GG-40
Features: 1.With CE GS certification
2.High speed in glue melting
3.Easily using
4.Safety
5.Price:USD0.5-USD3.00
Model No.: GG-60
Features: 1.With CE GS certification
2.High speed in glue melting
3.Easily using
4.Safety
5.Price:USD0.5-USD3.00
Model No.: GG-10
Features: 1.With CE GS certification
2.High speed in glue melting
3.Easily using
4.Safety
5.Price:USD:0.5-USD:3.00/pcs
Model No.: 555685
Features: T2 Extruding Gun belt repair
using in the operation of T2 compound A and T2 compound B, heats, softens and extrudes rope rubber
Model No.: 555686
Features: Belt repair T2 Extruder gun
for using in the operation of T2 compound A and T2 compound B, heats, softens and extrudes rope
Model No.: HK-961
Features: .High-temperature Hot melt Glue Gun
.power saving mode
.MAX POWER:200W
Model No.: 555685
Features: T2 Extruding Gun
for using in the operation of T2 compound A and T2 compound B, heats, softens and extrudes rope rubber.
Model No.: CG490-10-1
Features: 1. Nylon+ Stainless Steel
2. Used for injecting resin epoxies and coatings in Construction& Concrete
3. CE/OEM is available
Model No.: NL-307
Features: power tools,hand tools
1.Fast heating,High stability
2. this glue gun applied to clothing, electronics,pack industries etc
Model No.: NL-208
Features: hand tools
Applicable to the glue stick diameter 10.8--11.5MM
quickly melten the glue stick(internal PTC heater)
Model No.:
Features: Style:
UK AND USA