Axial fan:Dia.:200~280mm.
Volume:450~2210m3/h,
Pressure:35~300Pa,
Power:0.04~0.12KW,50Hz/60Hz,
Weight:13~23kg,380/440V
Port: qingdao port,shandong province ,china
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 1000 Set/Sets per Month
Payment Terms: L/C,T/T
Contact Supplier
CWZ Series Marine or Navy Small-sized Axial Fans
1. General
CWZ series marine or navy small-sized axial fans are suitable for ventilation of kitchen, lavatory, bulkhead, the public place and meeting-room etc, in the naval and merchant ships. They are also applicable in other places that suit
Axial fan:Dia.:200~280mm.
Volume:450~2210m3/h,
Pressure:35~300Pa,
Power:0.04~0.12KW,50Hz/60Hz,
Weight:13~23kg,380V/440V
2. Features
The fans have low-noise, small size, tight weight, stable performance, etc.
In the course of designing manufacturing, we had thought fully of the marine special conditions, the impellers are strictly made by dynamic balance adjustment over speed test. Therefore, the fans also have the features of good-anticorrosion, anti-swing, vibration resistance, shock resistance, shock resistance, stable running and safety reliable.
The fans can be used with 380V/220V, 50HZor 440V/220V, 60HZ.
3. Structure
The fans can be made into two structure types, type I (tube type), type II (porthole type):
I tube type for ventilation of short tubes or fixed on the bulkhead.
II type fixed on porthole. It can be fixed on the porthole or the bulkhead. Since it s water-proof it can be easily opened or closed to keep rain or sea water out.
Impeller is made of cast aluminum alloy, casing is welded by steel sheet.
5.Use and maintenance
5.1 Before installing the fans, should check whether each part is intact, whether the components are complete, whether the impeller and casing rotating direct are concordant.
5.2 When installing the duct of the inlet and outlet, should make the duct and fans be spontaneous identical, not join them forcing, not bring the weight of duct on the fans.
5.3 After installed the fans, check whether there is friction of collide between the impeller and the fixed parts by rotating the impeller. If collision, friction, loud noise or strong vibration happened, the fan should be restart after checking. Avoid the fan being bumped and other substance or liquid entered the fans. Please clean the dust on blade of impeller in time, so as not to break the balance and strengthen the noise.
5.4 The fans should be started-up while the inlet is opening,
5.5 After the fans wiring, the terminal box should be sealed, avoid the air or water in it.
5.6 As the fans operating, the motor electric current should be control strictly, not exceed the rated electric current. Avoid the motor burning,
5.7 The fans maintain must be done on stop working time. When burning, after check, should whether the every part of fans is normal.
5.8 As some fault occurred in fans operating, should find out the reason in time and think a way of resolution.
Marine fan,Axial flow fan,Axial fan,Exhaust fan,Supply fan,Small fan,Small-size fan,Ventilation fan,Ventilating fan,Marine ventilator,Marine ventilation,Marine blower,Air blower,Draught fan,Draft fan,Axial blower:
COMPANY INTRODUCTION
Our company,Qingdao Chunhao Air Blower Ventilation Equipment Co., Ltd. is located in the Scientific Technology Park of Shinan District, Qingdao. We are in the west of Laoshan scenic spot and are in the southeast of Qingdao Liuting International Airport. Our company is a specialized company in designing, producing, and serving ventilators for ships and other aeration facilities.
Our products - JCL(CLQ), JCZ(CZ), CBL, and CBZ aeration facilities have been CSS certified by the Anti-Explosion Examining Centers of ABS, BV, DNV, GL, KR, LR, NK, and RINA.
Our company has been awarded the International Quality Management Certificate ISO9001:2000 with complete manufacturing equipment, advanced technologies and perfect testing facilities and methods. Our company has an expert group for designing and manufacturing, and is composed of one professor (part-time), 4 senior engineers, 11 secondary engineers, 2 technicians and 21 skilled artificers. We are also engaged in designing and manufacturing whole sets of aeration systems for air exchange, dust cleaning and air power transportation.
Holding the tenet of "credibility" and sticking to the policy of "credibility leads to a better future", our company will speed up technical innovation and product designing and reward our customers with excellent products and service in the following days.
We warmly welcome all the customers from at home and abroad to visit us and we are sure that we will have a better future with our faithful corporation.
Tel:86-532-87973827 86-532-87061222 86-532-87896878
Fax:86-532-87973667 86-532-87896878
ADD:No.318A,Jiushui Road,Licang District,Qingdao,Shandong province,China