Y19A Jack hammer
1. Stability
2. Perfect Leg-Drill Balance
3. Uniform High Drill Speed
4. Comparable performance
Port: fuzhou
Minimum Order Quantity: 10 Piece/Pieces any pcs
Supply Ability: 1000 Piece/Pieces per Month more
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: wooden casecarton
Delivery Detail: after payment 10 days
item name: Y19A Jack hammer
Features: light weight>high torgue>very reliable&resistant to wear>large sliding face>high impact energy>good penetration in hard&soft rock>low spare parts consumption.
| products specifications | |
| item name | Y19A |
| Weight | 19kg |
| Overall dimensions | 600×534×157mm |
| Stoke | 54mm |
| Cylinder Dia | 65 mm |
| Air pressure | 0.4-0.5mpa |
| Water pressure | 0.2-0.3mpa |
| Impact energy | 40J |
| Torque (at0.4MPa) | |
| Impact frequency | >28-35Hz |
| Air consumption | 37-43L/S |
| Drilling speed | 180mm |
| Max drilling depth | >6m |
| Air pipe inside dia | 19mm |
| Water pipe inside dia | 13mm |
| Drill bit size | 32-42mm |
| Shank size | H22X108mm |
The machine is mainly used in samll quarries,small coal mines and limestone mines for drilling,blasting for constructing roads in mountain areas,also in the capital construction for water conservancy works.it is suitable for drilling works in large mines for boulder blasting and other projects as well. When it is matched with air- leg model FT100,it can perform both dry and wet drilling under various kinds of rocks,and it is evenmore flexible in drilling operation when matched with the small- size compressor of capacity of 1.5m3,the function will be better than others.
The flanged control vavle is adopted,so it has many advantages such as reasonable in structure,quick in starting ,light in weight ,fast drilling speed,lower air comsumption,smaller vibration,easier operation,lower trouble rate,long-life parts,good economic effect,ect.it is also equipped with a rubber damping handle,so is eary to operate and provide the operators with necessary working protection.
Model No.: 0.5~5kg
Features: safety cross peen hammer tools
use in dangerous field and magnetic field.
material:Al-Cu,Be-Cu,stainless steel
Model No.: 0.5~5kg
Features: hand cross peen hammer tools
use in dangerous field and magnetic field.
material:Al-Cu,Be-Cu,stainless steel
Model No.: 0.6kg
Features: safety tool is divided into beryllium copper alloy and aluminum-copper alloy can be used for a dangerous environment.
Model No.:
Features: This product to guard against explosions the tool.
Model No.:
Features: This product to guard against explosions the tool.
Model No.: 3P~18P
Features: german type sledge hammer
non-sparking tools can use in hazardous field where flammable and combustible vapors liquids gas
Model No.: 3P~18P
Features: german type sledge hammer
non-sparking hand tools can use in hazardous field where flammable and combustible vapors liquids gas
Model No.: 0.5P~4P
Features: cross pein hammer
non sparking tools can use in hazardous field where flammable and combustible vapors liquids ga
Model No.: TD0231
Features: mason's hammer with material of forged/cast,different sizes with high quality,competitive price and prompt delivery.
Model No.: 0.25kg~0.68kg
Features: non sparking tools hammer claw
use in dangerous field and magnetic field.
hand hammer
Model No.: 0.23kg~0.4kg
Features: non sparking safety tools hammer scaling
1.non sparking hammer
2.material:Al-Cu,Be-Cu
3.use in dangerous field and magnetic
Model No.: 0.5P~3P
Features: our hand tools have non sparking tools,non magnetic tools,steel tools.
hand tools ball peen hammer BF
0.5P~3P