1.Diameter of chisel :135mm
2.Weight of chisel:115kgs
3.used on HI-Tech 810
4.Certificate: ISO9001:2000
Port: QING DAO
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 100 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: Export standard packing
Delivery Detail: within 15days after receipt of LC or T/T
Different parts with different heat treatment technology,Improve strength and toughness
| Diameter of Chisel(mm) | 135mm | |
| weight of Chisel (kgs) | 115kgs | |
| applicable Type of Hammer | Hi-Tech 810 | |
MODEL | Hi-Tech 810 | |
| Gross weight | Triangle (kgs) | 1625 |
| Tower (kgs) | 1592 | |
| Total length | Triangle (mm | 2289 |
| Tower (mm) | 2400 | |
Drive Oil Pressure(kgs/cm3) | 160-180 | |
Drive Oil (litre/min) | 125-150 | |
Striking Frequency (bpm) | 350-600 | |
Hose Diameter (inch) | 1 | |
Rod Diameter (mm) | 135 | |
Rod Weight (kgs) | 115 | |
Applicable Bucket Capacity (m3) | 0.6-0.8 | |
Applicable Vehicle Weight (ton) | 16-25 | |
Model No.: HY-16
Features: Rebar cutter HY-16.
cut the steel bar up to 16mm.
Output: 10T.
Model No.: FYP-75
Features: hydraulic cable cutter FYP-75.
cut the copper/aluminium cable up to 75mm,
equipped with PT 3/8'' high pressure couplers.
Model No.: YP-40
Features: Hydraulic Cable Cutter YP-40.
cutting up to 40mm.
No set-up time required.
All blades are easily replaceable.
Model No.: 10MM
Features: hydraulic steel bar.
It is used to cut steel bar up to 10mm,
it's hydraulic type and is quite force-saving and sharp.
Model No.: SYK-15
Features: Hydraulic Hole Digger SYK-15
It is suitable for punching up to 3mm mild steel sheet
with the moulds:63mm,76mm,89mm,101mm,114mm
Model No.: CB-200A
Features: hydraulic brass bender CB-200A
It is used to bend copper/aluminium sheet with the thickness of 12mm,the width is 200mm
Model No.: CP-700-2B
Features: hydraulic pump CP-700-2B is hand operated pump.
It is double acting pump .
Japannese style.
Model No.: CB-200A
Features: hydraulic bending tool CB-200A
It is suitable for bending copper/aluminium sheet with the width of the sheet up to 200mm.
Model No.: CH-20
Features: hydraulic hole digger CH-20
Dig the copper/aluminium sheet of 10mm
It is specialized for angle steel, flat steel, brass plate.
Model No.: CB-150A
Features: hydraulic Bendign Tool CB-150A.
It is used to bend copper/aluminium sheet with the thickness of 10mm,the width is 150mm.
Model No.: YP-40
Features: Hydraulic Cable Cutter KDG-40BL
cutting up to 40mm.
No set-up time required.
All blades are easily replaceable.
Model No.: CAC-100
Features: hydraulic angle iron cutting tool CAC-100.
cut the iron sheet with the thickness of 10mm.