API&ISO
best service&good feedback
short delivery time
all sizes and IADC available
Port: Tianjin seaport/China or the main port in China
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 800 Piece/Pieces per Month as your order
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: Plywood cases.
Delivery Detail: 7 workdays after conforming your order
It is a company with manufacturing,design,research and development of PDC drilling bit for almost all codes of Tricone rock bit.In addition,we produce drilling rig,mud pump ,Diamond Drill and other accessories
Our company have reliable quality and competitive prices.We are certified by API and ISO.Whatever drilling tools you need,we can supply them,also we can produce them according to your special orders
FangLei products not only won the trust of domestic users,but also are exported Southeast Asia,Russia,America and Africa
TCI bits series:
Soft formation TCI tricone bits:
The soft formation TCI tricone bits are used to drill low compressive strength, very soft formations. This bit maximized to use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
Medium formation TCI tricone bits:
The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Hard formation TCI tricone bits:
The hard formation TCI tricone bits can be used to drill hard and abrasive formations. Wear resistance tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical shaped inserts are used in all rows to provide cutter durability and long life.
Medium hard formation TCI tricone bits:
The medium hard formation TCI tricone bits features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Bit size | Inch(in) | 5 7/8 | 6 | 61/8 | 6 1/4 | 7 7/8 | 8 3/8 | 8 1/2 | 8 3/4 | 9 1/2 | 9 5/8 | 9 3/4 | 9 7/8 | 12 1/4 | 13 3/4 |
Metric(mm) | 149.2 | 152.4 | 155.6 | 158.7 | 200.0 | 212.7 | 215.9 | 222.2 | 241.3 | 244.5 | 247.3 | 250.8 | 311.1 | 349.2 | |
Bit type | 437 | 437 | 437 | 437 | 447 | 417 | 417 | 417 | 417 | 417 | 417 | 417 | 417 | 417 | |
517 | 517 | 517 | 517 | 517 | 437 | 437 | 437 | 437 | 437 | 437 | 437 | 437 | 437 | ||
537 | 537 | 537 | 517 | 517 | 517 | 517 | 517 | 517 | 517 | 517 | 517 | ||||
617 | 617 | 547 | 537 | 537 | 537 | 537 | 537 | 537 | 537 | 537 | |||||
637 | 637 | 617 | 617 | 617 | 617 | ||||||||||
637 | 637 | 637 | |||||||||||||
API Regular Pin (in) | 3 1/2 | 4 1/2 | 6 5/8 | ||||||||||||
Recommended make-up torque for bit shank (KN.m) | 9.50-12.2 | 16.30-21.70 | 37.93-43.30 |