tungsten carbide shear blade tip

Product Features:

tungsten carbide shear blade:12 years experinces in tungsten carbide,shear blade for cutting tools,wear resistant carbide blade

Business Terms:

Port: Shanghai/Guangzhou/Shenzhen

Minimum Order Quantity: 5 Kilogram/Kilograms depend on size

Supply Ability: 300 Ton/Tons per Year depend on size

Payment Terms: L/C,T/T,Western Union,MoneyGram

Contact Supplier

Specifications and Product Details:

Tungsten Carbide inserts are replaceable cutting tips and designed for nonstop cutting cast iron, alloy and other nonmetal materials in precision lathe. These inserts with excellent properties are also for interrupted cutting, whirling of rough turn in semi-precision lathes, precision lathes or small-section precision lathes. Our Carbide inserts are wear resistant.

Tungsten carbide grade and application

Grade	Density g/cm³	TRS N/mm²	Hardness(HRA)	Application recommended
YF10.1	14.80—15.15	≥1880	≥91.0	Suitable for drawing dies to draw small diameter ferrous wire and non-ferrous metal wire a high speed
YF10.2	14.30—14.65	≥2430	≥91.8	Suitable for strips to make wood-working tools
YL80	13.75—14.05	≥3200	≥89.5	Suitable for plates to make die blanks
YL80.1	14.70—14.90	≥2020	≥89.5	High abrasion resistance, used in powder metallurgy mould etc.
YL80.2	14.00—14.20	≥2900	≥86.5	Suitable for making small watch parts, punching dies of instrument, roll, cut the trigger.
YL80.3	13.50—13.80	≥2540	≥85.0	Suitable for producing punching plate under high stress.
YL90	13.50—13.70	≥2500	≥82.5	With high strength and toughness, suitable for making large size reducing die, better than YG20C.
YL90.1	13.90—14.10	≥2340	≥84.5	Suitable for die blanks for reducing diameter with large dimension and dies blanks assembled of six pieces
YL90.2	13.70—13.90	≥2400	≥83.0	Suitable for die blanks for reducing diameter with middle dimension
YL90.4	13.20—13.40	≥2600	≥82.0	High strength and toughness, used to cold heading mould, cold impacting mould and cold press mould with high pressing
YL90.5	13.00—13.20	≥2760	≥81.0	Good impact resistance, fatigue resistan,used for high loading punching die
YL90L	13.20—13.40	≥2550	≥81.5	Used for general cold screw scissors die and cutting shear blade tips
YG6A	14.80—15.10	≥1580	≥91.5	Suitable for semi-finishing of cast, nonferrous metal and low-alloy steel
YG6X	14.70—15.10	≥1600	≥91.0	Suitable for drawing dies to draw steel wire, on-ferrous wire and rods with small diameter at a high speed
YG6	14.70—15.05	≥1670	≥89.5	Suitable for drawing dies to draw steel wire, on-ferrous wire under a diameter of 20mm and tubes under a diameter of 10mm
YG8	14.60—14.8	≥1840	≥89	Suitable for drawing dies to draw steel wire, on-ferrous wire and alloy rods, tubes, also for making wear parts, tools(such as muzzles, grinders, drills ect.)
YG15	13.90—14.20	≥2700	≥86.5	Suitable for drawing dies to draw steel rods and tubes at a high compression ratio, also for heading dies, drills etc.
YG20	13.40—13.70	≥2480	≥84.5	Suitable for punching and heading dies