Product Features:

tungsten carbide products

Tungsten Carbide Dies:

Wide range of sizes

Lower cost

Anti-corrosion and high wear resistance

Business Terms:

Port: Shanghai/Guangzhou/Shenzhen

Minimum Order Quantity: 5 Kilogram/Kilograms depend on products

Supply Ability: 300 Ton/Tons per Year depend on products

Payment Terms: L/C,T/T,Western Union,MoneyGram

Contact Supplier

Specifications and Product Details:

tungsten carbide products

Tungsten carbide grade and application

Grade	Density g/cm³	TRS N/mm²	Hardness(HRA)	Application recommended
YF10.1	14.80—15.15	≥1880	≥91.0	Suitable for drawing dies to draw small diameter ferrous wire and non-ferrous metal wire a high speed
YF10.2	14.30—14.65	≥2430	≥91.8	Suitable for strips to make wood-working tools
YL80	13.75—14.05	≥3200	≥89.5	Suitable for plates to make die blanks
YL80.1	14.70—14.90	≥2020	≥89.5	High abrasion resistance, used in powder metallurgy mould etc.
YL80.2	14.00—14.20	≥2900	≥86.5	Suitable for making small watch parts, punching dies of instrument, roll, cut the trigger.
YL80.3	13.50—13.80	≥2540	≥85.0	Suitable for producing punching plate under high stress.
YL90	13.50—13.70	≥2500	≥82.5	With high strength and toughness, suitable for making large size reducing die, better than YG20C.
YL90.1	13.90—14.10	≥2340	≥84.5	Suitable for die blanks for reducing diameter with large dimension and dies blanks assembled of six pieces
YL90.2	13.70—13.90	≥2400	≥83.0	Suitable for die blanks for reducing diameter with middle dimension
YL90.4	13.20—13.40	≥2600	≥82.0	High strength and toughness, used to cold heading mould, cold impacting mould and cold press mould with high pressing
YL90.5	13.00—13.20	≥2760	≥81.0	Good impact resistance, fatigue resistan,used for high loading punching die
YL90L	13.20—13.40	≥2550	≥81.5	Used for general cold screw scissors die and cutting shear blade tips
YG6A	14.80—15.10	≥1580	≥91.5	Suitable for semi-finishing of cast, nonferrous metal and low-alloy steel
YG6X	14.70—15.10	≥1600	≥91.0	Suitable for drawing dies to draw steel wire, on-ferrous wire and rods with small diameter at a high speed
YG6	14.70—15.05	≥1670	≥89.5	Suitable for drawing dies to draw steel wire, on-ferrous wire under a diameter of 20mm and tubes under a diameter of 10mm
YG8	14.60—14.8	≥1840	≥89	Suitable for drawing dies to draw steel wire, on-ferrous wire and alloy rods, tubes, also for making wear parts, tools(such as muzzles, grinders, drills ect.)
YG15	13.90—14.20	≥2700	≥86.5	Suitable for drawing dies to draw steel rods and tubes at a high compression ratio, also for heading dies, drills etc.
YG20	13.40—13.70	≥2480	≥84.5	Suitable for punching and heading dies