i we have enough the you wanted
the bit have high quality and high wear resistance
Port: shenzhen
Minimum Order Quantity: 100 Piece/Pieces
Supply Ability: 100 Piece/Pieces per Year
Payment Terms: T/T
Contact SupplierPackaging Detail: wooden boxes
Delivery Detail: 7 days after receive your deposit
1.IADC 437 : Soft formation TCI tricone bits
The 437 tci bits are used to drill low compressive strength, very soft formations. Tci bits maximize the use of bothconical and chisel tungsten carbide inserts of large diameters and high projection.This cutting structure design, combined with maximum cone offset,results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formation.
Very soft with low compressive strength, such as soft marl,salt,unconsolidated sandstone,soft limestone, etc
2.IADC 517: Medium formation tci tricone bits
The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows.This design provides a fast drilling rate and add cutting structure durability in medium to medium hard formations.
Soft with low compressive strength,such as shale,sandstone,anhydrite,shale,etc.
3.IADC 537: Medium formation tci tricone bits
Medium soft with low compressive strength,such as Shale,sandstone,anhydrite,shale,etc.
4.IADC 617: MEDIUM -HARD formation tci tricone bits
The 617 features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows.This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations.
5.IADC 637: Hard formation tci tricone bits
The 637 bits can be used to drill hard and abrasive formations. Water-resistant tungsten carbide inserts are used in the outer rows to prevent loss of the bit gauge. Maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.