spray gun for coating machine not only improved the effect of atomization but also solving the problem of leakage and clogging.
Port: Shanghai or Ningbo
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 500 Set/Sets per Year
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: Standard exporting woodern case
Delivery Detail: 45 days
The spray gun for coating machine has tackled the technical problems of the structure of spray gun and designed a plunger of penetration needle type, thereby not only improving the effect of atomization but also solving two difficult problems, i.e. leakage and clogging of injectors, and obtaining a national technical patent (patent numberZL96206289.8.) (Fig. 11). In using the spray gun, it is only needed to turn the adjust screw at the tail of spray gun, then the quantity of sprayed slurry can be adjusted. If clogging occurs during the process of operation, it is only needed to close the inlet pipe of compressed air, the plunger under the action of the spring at its tail will move towards the nozzle at the head of spray gun, then the penetration needle will enter into the nozzle and remove the clogging matter, so the operation is very convenient.