saw blades - 50*2.0

Products we offer:HSS Circular Saw Blade,Slitting Cutter,Cold Saw Blade,Circular Saw Blade,Thin Saw,Alloy Saw Blade,Side And Face Saw Blade,Saw Balde For Cutting Pipe/stainless ,Metal Slotting Saw,ZhengChao Saw Blade.

Material we offer: HSS-DMO5,W5,W6,W9,M2,M42,Cr12mov etc.

Specification:Out Diameterφ20-600mm,Bore Diameter5-60mm

Thickness:0.2~6.0mm

Teeth NO:As your requirement

Teeth Shape:No Teeth,A,AW,B,BW,HZ

Surface Of Treatment(Coating):

Steam Treated

This is currently the most common surface treatment for circular saw blades. The steam treatment creates a hard oxide layer on the blade and is the simplest “coating” available. It is used for general cutting applications, except for aluminum, copper, brass and their alloys.

Goldface (TiN – Coating)

The GOLFACE coating gives the blade a great surface hardness. The high oxidation temperature, together with other positive characteristics, makes it possible to work at cutting and feed rates approx. 50% higher than with an untreated blade. Cutting times are reduced and blade life is increased. GOLDFACE blades are suitable for cutting of mild steels (500 – 750 N/mm2).

Speedface (TiCN – Coating)

This is a multi-layer coating with a low friction coefficient that offers an excellent finish at very high cutting and feed rates. It can be used for hard steels (800 – 1000 N/mm2), for copper and brass alloys and for extremely abrasive materials where the phenomenon of “chip welding” can be a problem.

Bestface (CrN - Coating)

Characterised by a high surface hardness and low friction coefficient (the lowest of all), this coating is particularly suitable for cutting pasty materials such as copper, brass and bronze. Thanks to its high corrosion resistance this coating is also ideal for some plastics and applications where high temperatures and corrosion phenomena could develop.

Activeface

High performance coating for cutting high tensile strength materials, stainless steels and abrasive materials. Thanks to its high oxidation temperature (approx. 700°C) and low thermal conductivity, this treatment is suitable for dry-cutting at relatively high cutting speeds

Teeth shape of piper cutter circular saw blade

Meral Circular saw Blades Are Ground,According To Their Application,With Different Kinds Of Tooth Forms.

. Tooth Form "A" And "AW"
For thin Metal Slitting Saw Blades with a tooth pitch up to approx 3.0mm Advisable for brass, tooth from "A" is suitable for slotting materials. All teeth of tooth form "AW" are bevelled alternatively.

. Tooth Form "B" And "BW"
Suitable for cutting tubes and porfiles made of steel or non-ferrous metals. Tooth form "B" is specialized for cutting very thin-walled pipes and profiles. All teeth of tooth form "BW" are bevellde alternatively.

.Tooth Form HZ
This tooth is also known as form "C". Teeth are ground according to the roughing and finishing tooth system. A tooth pair is consising of one roughing tooth (1/3 cutting width)and one finishing tooth (2X1/3 cutting width). Accoriding to the triple chip geometry the roughing tooth is approx 0.2-0.3mm higher compared with the finishing tooth; Tooth form "HZ" is suitable for cutting solid materials.

Metal saw blade /slitting saw blade /slotting saw blade

Range: Diameterφ20-315mm, boreφ5-40mm.
Thickness: 0.2-6.0mm
Number of teeth: Coarse pitch, Medium pitch, Fine pitch.
Type of Making Teeth: Milling Grinding(Out Diameter>50, the range Of teeth<25, thickness<6)
Surface of Cutter: Original colour, black, TiN coated.
Material: W9Mo3Cr4V, M2 or super-hard material.
Application: Slotting saws in both high speed steel or super high speed steels suitable for cutting-off

steels and grooving steels and alloys on manual, semi-automatic and fully automatic machines.
Remark: The Diameter, bore, Thickness, Teeth NO. and surface also can be made to order

Metal slotting saw kinds:
A.Metal slotting saw with coarse pitch
B.Metal slotting saw with medium pitch
C.Metal slotting saw with fine pitch