Air Leg Rock Drill,pusher leg rock drill YO18
(1)high torsion strength,
(2)Jack hammer
(3)light weighted,
Port: FUZHOU
Minimum Order Quantity: 1 Set/Sets air leg rock drill YO18
Supply Ability: 2000 Set/Sets per Month air leg
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: W/C or others
Delivery Detail: 7 days
Air Leg Rock Drill,pusher leg rock drill YO18
Weight | 18kg |
Overall length | 550mm |
Cylinder dia. | 58mm |
Piston stroke | 45mm |
Air pipe inner dia. | 19mm |
Water pipe inner dia. | 8mm |
Shank dimensions | 22×108mm |
Water pressure | 3.9-5.9×105Pa |
Air pressure | ≤at 3.9 MPa |
Air consumptionat3.9×105 Pa | <1.2m/min(22.6L/S) |
Average speed (at 3.9×105Pa ) | 80mm |
Impact energy(at4.9×105Pa ) | 24.5J(31Hz) |
Torque(at4.9×105Pa ) | 7.85N·m |
Airconsumption(at4.9×105Pa ) | ≤1.35m/min |
Average speed(at4.9×105Pa ) | 120mm |
FY200 oil lubricator | |
Weight | ≤1.2kg |
Oil capacity | 200mm |
FT100 air leg | |
Weight | 11kg |
Propulsion stroke | 810mm |
Cylinder dia. | 52mm |
Length | 1312mm |
Air Leg Rock Drill YO18 is used for rock drilling, blasting holes and other drilling works in the quarries, small coal mines and other constructions.
Its suitable for drilling of horizontal or inclined holes on the medium-hard and hard rock. When its matched with air leg Model FT100, it can blast holes from different directions and angles.
Blast hole diameter is between 36mm and 42mm. with an efficient depth from 1.5m to 2m.
Its recommended to be matched with Model py-1.2/0.39 air compressor which is powered by Model RS1100 diesel engine. Other suitable air compressors can also be matched with this rock drill.