pneumatic rock drill
advantage 1.good performance
2.high efficiency
3.low consume
Port: as your request
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 2000 Set/Sets per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: wooden case or depend on your request
Delivery Detail: 7-8
pneumatic hammer
(1)
The rock drill has good performance under low pressure,it is suitbale for act impetus with long Air pipe and small air compressor.And it is use for drilling in mines,quarries,railway construction,water conservancy and national defence project facility. When it is matched with Model FY200A oil reservoir and Model FT160A or FT160B air-leg, it can perform wet drilling under various of rocks at aclinic and incline orientation,it can also use in the trolley without Air-leg.
(2)
| Weight | 24 kg | |
| length | 668mm | |
| Air pressure | 0.35-0.63MPa | |
| Cylinder dia | 70mm | |
| Piston stroke | 70mm | |
| Impact frequencey(at0.4MPa) | ≥28HZ | |
| Impact energy(at0.4MPa) | ≥45J | |
| Air consumption (at0.4MPa) | ≤38 L/S | |
| Noise | ≤112dB(A) | |
| Water pressure | 0.2-0.3MPa | |
| Air pipe (inner dia) | 19 mm | |
| Water pipe (inner dia) | 13 mm | |
| Bore dia | 34-42mm | |
| Bore depth | 5m | |
| Shank dimensions(hex×length) | 22×08 ±1 mm | |
| Model FT200A Oil reservior | ||
| Weight | .2kg | |
| Oil capacity | 0.2L | |
| Air leg | FT160A | FT160B |
| Weight | 17Kg | 16 kg |
| Length:max | 3006mm | 2526mm |
| min | 1668mm | 1428mm |
| Propulsion stroke | 1338 mm | 1098 mm |
| Axis thrust(max) | 2000N | 2000N |