pneumatic gun
Cartridge: one-component
Capacity:600ml
Material: aluminum body,iron handle
Port: shanghai
Minimum Order Quantity: 200 Piece/Pieces
Supply Ability: 10000000 Piece/Pieces per Month
Payment Terms: T/T,Western Union
Contact SupplierPackaging Detail: 1pcs/polybag,5bags/ctn
Delivery Detail: 20days
pneumatic gun
Item:CGA-600
Weight:1.0kg/piece
Packing:5pcs/carton
Outer packing: 385×550×235mm
Scope of application(tools):
Suggested Use Materials:
--Epoxies, Acrylics, Silicones, Polyesters.
--Epoxy Acrylates, Hybrids, Urethanes.
--Polysulfides, foams, Polymers, polyureas
Operating Instructions:
Load Sealant Pack:
Remove the front cap.
Pierce or cut off the neck of the cartridge and screw on the nozzle
Using the cartridge, push the plunger down the barrel until it will go no further.
Tightly replace the front cap.
l Ensure the desired nozzle is fitted to the front cap.
l Using a new sachet, push the floating plunger down the barrel until it will go no further.
l Cleanly cut off the end of the sachet or crimped clip where present.
l Tightly replace the front cap.
Operation of the trigger:
By pulling the trigger, a cushion of compressed air builds up inside the applicator to initiate the flow of sealant. On releasing the trigger, the sealant flow ceases as the compressed air escapes rapidly by a silenced quick exhaust valve at the rear of the gun..
Caution: