laser distance meter 80m
1,suitable price
2,multi function, with range 80m
3,simple, extensive use
Port: Shanghai
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 5000 Unit/Units per Month
Payment Terms: T/T
Contact Supplier
laser distance meter 80m
PD-58 Technical Data
| Distance measurements: Measuring accuracy up to 10 m (2 σ, standard deviation) | typically: ± 1.5 mm* |
| Power Range Technology™: Range (use target plate from about 80m) | 0.05 m to 80 m |
| Smallest unit displayed | 1mm |
| Distance measurement | Available |
| Minimum/maximum measurement, Continuous measurement | Available |
| Area/volume calculation of room data | Available |
| Addition / subtraction | Available |
| Indirect measurement using Pythagoras | Available |
| Tilt measurements: Tilt sensor: Accuracy (2 σ, standard deviation) - to laser beam - to the housing | ± 0.3° ± 0.3° |
| Horizontal measurement | Available |
| Indirect measurement using tilt sensor (direct horizontal distance) | Available |
| Angle measurement using tilt sensor(± 45°) | Available |
| General: Laser class | II |
| Laser type | 635 nm, < 1 mW |
| laser point (at distances) | 6 / 30 / 60 mm (10 / 50 / 100 m) |
| Autom. laser switch-off | after 3 min |
| Autom. instrument switch off | after 6 min |
| Display illumination | Available |
| Keypad illumination | Available |
| Multifunctional end piece | Available |
| Timer (self-triggering) | Available |
| Save constant value | Available |
| Historical storage (20 values) | Available |
| Tripod thread | Available |
| Battery life, Type AAA, 4 x 1.5V | up to 5 000 measurements |
| Protection against splashes and dust | IP 54, dust-proof, splash-proof |
| Dimensions | |
| Weight (with batteries) | |
| Temperature range: Storage Operation | -25°C up to +70°C (-13°F up to +158°F) -10°C up to +50°C (14°F up to +122°F) |
* maximum deviation occurs under unfavourable conditions such
as bright sunlight or when measuring to poorly reflecting or very
rough surfaces. Measuring accuracy between 10 m and 30 m may
deteriorate to approx. ± 0.025 mm/m, for distances above 30 m
to ± 0.1 mm/m.
Model No.:
Features: concrete nailer
Model No.:
Features:
Model No.:
Features:
Model No.:
Features:
Model No.:
Features: Medium-sized Wagon Ball Joint Extractor (32mm)
Model No.:
Features: Light(mini) Truck Ball Joint Extractor (30mm)
Model No.: LV1010
Features: LV1010 air compressor
Model No.:
Features: Ball Joint Remover
Model No.: XL25,XL30
Features: with multi-performance, light wire saw. The small size, light weight, high cutting efficiency, use and maintain simply.
Model No.: 32mm
Features: Viskovita sponges made in Germany
easy to use
economic
Model No.: 5,6,8,10,12,14,16,20
Features: The marine rigging is our common goods.It can be widely used in ships,vessels,constructions and machines,and so on.
Model No.: HP-480vs+
Features: Whole machine frame founding ,precise process,
Optimized circuit design, precise numerical control push paper,
Optics indicate