1.It is also called spiral router bit
2. This kind of bit is used for jointing, rabbeting and grooving CNC routers
Port: Guangzhou
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 200 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: 1..blue plastic box 2.Firsit it will be packed with pearl cotton and then put in box to avoid any chip in the shipment
Delivery Detail: two weeks to four weeks
1.1+1 diamond router bits
2.withlarge shear angle for long tool life and optimum quality of cut:
in particleboard and MDF, melamine and paper laminated in HPL, veneered panel material etc
3.low purchase price due to large scale manufacturing
4 shear angel, alternating top and bottom
5 with HW plungeing insert for doagonal (when grooving, with PCD plunge tip)
6.gullet areas and chip evacuation gap ensure optimum chip eveacuation
7.gold surface finish
8.with length adjusting screw for shank 12-25
9. It is nickel coated to prevent from rust
code for right hand | code for left hand | diameter | cutting length | shank | total lentgh | Z | height of tip |
010 | 013 | 12 | 25 | 12 | 75 | 1+1 | 2.5 |
020 | 023 | 12.7 | 25 | 12.7 | 75 | 1+1 | 2.5 |
030 | 033 | 12 | 35 | 12 | 85 | 1+1 | 2.5 |
040 | 043 | 16 | 25 | 16 | 85 | 1+1 | 2.5 |
050 | 053 | 16 | 35 | 16 | 95 | 1+1 | 2.5 |
060 | 063 | 16 | 43 | 16 | 103 | 1+1 | 2.5 |
070 | 073 | 18 | 25 | 20 | 85 | 1+1 | 2.5 |
080 | 083 | 18 | 35 | 20 | 96 | 1+1 | 2.5 |
090 | 093 | 18 | 43 | 20 | 103 | 1+1 | 2.5 |
100 | 103 | 18 | 25 | 25 | 90 | 1+1 | 2.5 |
110 | 113 | 18 | 35 | 25 | 100 | 1+1 | 2.5 |
120 | 123 | 18 | 43 | 25 | 108 | 1+1 | 2.5 |
130 | 133 | 20 | 25 | 20 | 85 | 1+1 | 2.5 |
140 | 143 | 20 | 35 | 20 | 95 | 1+1 | 2.5 |
150 | 153 | 20 | 43 | 20 | 103 | 1+1 | 2.5 |
160 | 163 | 20 | 25 | 25 | 90 | 1+1 | 2.5 |
170 | 173 | 20 | 35 | 25 | 100 | 1+1 | 2.5 |
180 | 183 | 20 | 43 | 25 | 108 | 1+1 | 2.5 |
9.It is also available for disposable router bits if you need.
Here are photos of diamond router bit (1+1 type)