1.It is for jointing and rabbeting of laminated pane materials
2.It is for premilling on egde banding machines (eg. Homag, SCM)
Port: Guangzhou
Minimum Order Quantity: 1 Pair/Pairs
Supply Ability: 100 Pair/Pairs per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: 1.carton board box
Delivery Detail: two weeks to three weeks
1. diamond cutting tools for edge banding machines(eg:Homag, SCM, Biesse,IMA and etc)
2.for chip-free jointing and rabbeting of melamine, paper HPL-laminated and veneered panels
3.application against feed on IMA machines φ100, Homag machines φ125
4.low noise level
5. opposing shear angle
6.symmetrical design-applicable left and right
| code for right hand | code for left hand | diameter | height | bore | teeth | the height of tip |
| 010 | 013 | 80-100 | 35 | 30/40 | 2+2 | 2.5 |
| 020 | 023 | 80-100 | 35 | 30/40 | 2+2 | 4 |
| 030 | 033 | 100-125 | 35 | 30/40 | 3+3 | 2.5 |
| 040 | 043 | 100-125 | 35 | 30/40 | 3+3 | 4 |
| 050 | 053 | 100-125 | 48 | 30/40 | 3+3 | 2.5 |
| 060 | 063 | 100-125 | 48 | 30/40 | 3+3 | 4 |
| 070 | 073 | 100-125 | 58 | 30/40 | 3+3 | 2.5 |
| 080 | 083 | 100-125 | 58 | 30/40 | 3+3 | 4 |
| 090 | 093 | 100-125 | 63 | 30/40 | 3+3 | 2.5 |
| 100 | 103 | 100-125 | 63 | 30/40 | 3+3 | 4 |
| 110 | 113 | 125-160 | 63 | 30/40 | 3+3 | 2.5 |
| 120 | 123 | 125-160 | 63 | 30/40 | 3+4 | 4 |
This kind of tooth configuration is also available
7.Sharpening and care
1)To ensure the quality of the tool and a safe work envirnment;
2)The tools must be in good operating conditon
3)Periodic inspections and cleanings are required
4)The cutting edges require sharpening when
-the edge are chipped, and the surface of the workpieces no longer meets the acceptable requirements
-power consumption increases noticeably
-pitch,dust etc has accumulated on the tools. This affects the quality of cut.
therefore the tools require periodic cleaning depend on the operating conditions
-Thoroughly clean the tools when they are sharpene
8.Here is the photo of edge banding cutter head
Model No.: MAHA
Features: suitable for Masonry Material ,stone,marble granite.faster smooth cutting;low electricity;longer life;low price;size:12''-14''
Model No.: COAC
Features: suitable for Concrete,Aspalt.faster and smooth cutting;low electricity;longer life;low price;size:12''-14''
Model No.: COLP
Features: suitable for Concrete,Aspalt.faster and smooth cutting;low electricity;longer life;low price;size:12''-14''
Model No.: GBDT
Features: suitable for stone, granite.marble,concrete, asphalt, ceramic,
fast and smooth cutting,low electricity,low price.size:66-116mm
Model No.: 0101
Features: suitable for Concrete and Asphalt,stone,brick .faster and smooth cutting;low electricity;longer life;low price;size:6''-14''
Model No.: CORC
Features: suitable for wet &dry ,stone,Brick, Block and Masonry,concrete,asphalt,fast and smooth cutting,low electricity& price.5''
Model No.: GBCS
Features: suitable for stone, granite.marble,concrete, asphalt, ceramic,
fast and smooth cutting,low electricity, less waste,low price.
Model No.: CORK
Features: suitable for wet &dry ,stone,Brick, Block and Masonry,concrete,asphalt,fast and smooth cutting,low electricity& price.
Model No.: COAR
Features: suitable for Concrete and Asphalt .faster and smooth cutting;low electricity;longer life;low price;size:12''14''16''
Model No.: 0131
Features: suitable for Concrete and Asphalt,stone,brick .faster and smooth cutting;low electricity;longer life;low price;size:10''-24''
Model No.: CORB
Features: suitable for wet &dry ,stone,Brick, Block and Masonry,concrete,asphalt,fast and smooth cutting,low electricity& price.3''-4''
Model No.: CNMN 12T608
Features: High Efficiency
Low Cost