1.tungsten carbide cold forging dies
2.100%raw materials
3.Blanks or finished
High quality, moderate price, and good service
Port: Shanghai or any
Minimum Order Quantity: 10 Kilogram/Kilograms
Supply Ability: 30 Ton/Tons per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: standard export package.
Delivery Detail: 3-30days as per your order
1.tungsten carbide cold forging dies
2.100%raw materials
3.Blanks or finished
High quality, moderate price, and good service.
All the products musr be inspected strictly with the ultrasonic and only those haven’t any harm such as pore canbe shipped out. High density,high wear&impact resistance,which lead them a long lifetime.
| Properties and applications for tungsten carbide dies. | |||||||||||
| Grade | Performance & application recommended | ||||||||||
| Density | T.R.S | Hardness | |||||||||
| g/cm3 | MPα | HRA | |||||||||
| A | 13.5 | 3000 | 83.5 | Good wea ristance and high bending strength. Primariy for nut forming dies and high impact resistance forging dies. | |||||||
| YM11 | 14.4 | 2420 | 88.5 | Forming or stamping dies for metal powders and nonmetal powders. | |||||||
| YM15 | 14.0 | 2500 | 87.5 | For fabricating drawing dies of stain tubes and rods under High compressibility ratio;punching,stamping ,froging tools under large stress. | |||||||
| YM20 | 13.5 | 2800 | 85.5 | For fabricating of stamping dies for watch parts, spring plates of musical instruments, batters jars, small sized steel balls, screws, screw caps. | |||||||
| ML32 | 13.9 | 2750 | 85.5 | Impact resistance forging dies | |||||||
| ML35 | 13.7 | 2800 | 84.5 | Impact resistance forging dies, hot-press forging dies and rollers. | |||||||
| ML40 | 13.5 | 2850 | 83.5 | Dies for resistant or impact resistant application. | |||||||
| ML50 | 13.3 | 2900 | 83.0 | Nut forming dies and high impact resistance forging dies. | |||||||
| ML60 | 13.1 | 2950 | 82.5 | Stainless bolt header dies and rollers. | |||||||
| ML90 | 13.3 | 3200 | 82.0 | Screw cap forming dies with high impact resistance ( Highest impact resistance forging dies). | |||||||
| Other grades may be offered by customers' requirements | |||||||||||
Model No.: HSS END MILLS
Features: 1.USG,HSS end mills with plain shank,HOMO
2.finishing cutter&roughing cutter
3..cobalt 8% HSS
4.stub & regular & long
Model No.: 0071
Features: suitable for Concrete and Asphalt,stone,brick .faster and smooth cutting;low electricity;longer life;low price;size:12''-16''
Model No.: COHS
Features: suitable for Concrete,.Asphalt .faster and smooth cutting;low electricity;longer life;low price;size:12''14''
Model No.: CBAA
Features: suitable for wet &dry cutting.marble,concrete,asphalt,ceramic,
fast and smooth cutting,low electricity,low price.size:25-162mm
Model No.: 0272
Features: suitable for marble,Concrete Asphalt,stone,granite .faster and smooth cutting;low electricity;longer life;low price;size:4''-8''
Model No.: GBNT
Features: suitable for stone, granite.marble,concrete, asphalt,
fast and smooth cutting,low electricity,low price.2-7/8",3-3/4", 4-3/4"
Model No.: GBBJ
Features: suitable for stone, granite.marble,concrete, asphalt, ceramic,
fast and smooth cutting,low electricity,low price.75-101mm
Model No.: GBEL
Features: suitable for stone, granite.marble,concrete, asphalt, ceramic,
fast and smooth cutting,low electricity, less waste,low price.
Model No.: GBOC
Features: suitable for stone, granite.marble,concrete, asphalt, ceramic,
fast and smooth cutting,low electricity,low price.59-91mm
Model No.: MBN7000
Features: Superb anti-fracture
Good wear resistance
Excellent chemical stability
Higher cutting rates
Longer lifespan
Model No.: GBBW
Features: suitable for stone, granite.marble,concrete, asphalt, ceramic,
fast and smooth cutting,low electricity, less waste,low price.
Model No.: CBPB
Features: suitable for stone, granite.marble,concrete,asphalt,ceramic,
fast and smooth cutting,low electricity,low price.size:3/4''-14''