cemented carbide
OEM cemented carbide,ISO9001
YG6,YG11,YG15 or according to your points
good feedback cemented carbide
Port: dalian or any ports in china
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 10000 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: wooden case or as your demand
Delivery Detail: 1-20days
cemented carbide/Tungsten Carbide tips/tungsten carbide
Tungsten carbide insert have a thin metal blade or disk with a sharp, usually toothed edge. Tungsten Carbide tips is used for cutting wood, metal, or other hard materials. They can be hand-operated or power-driven. Our carbide tips have used in surface processing of cast irons, colored metal and alloys, as well as nonmetal materials for hard metal, carbide rough turn, rough planning, and precision milling.
Specification
We supply tungsten carbide wear part, tungsten carbide blanks, tungsten carbide rod, tungsten carbide plate, tungsten carbide tips, tungsten carbide drill bits, tungsten carbide saw tips, tungsten carbide tools, tungsten carbide insert, tungsten carbide blade, tungsten carbide dies, tungsten carbide products.
Crade | Density | TRS | Hardness | USE |
| (g/cm2) | (N/mm2) | (HRA) | ||
| YG8C | 14.7 | 2200 | 88 | Mostly used as the buttons of small and mediumsized percussion bits and as the inserts of rotary prospecting bits to cut soft and medium hard formations. |
| YG11 | 14.3 | 2100 | 88 | Largely for the inserts and buttons of percussion bits and tricone bits to cut medium-hard,hard,and very hard formations. |
| YG11C | 14.35 | 2200 | 87.6 | Largely for the inserts and buttons of percussion bits and tricone bits to cut medium-hard,hard,and very hard formations. |
| YG10C | 14.45 | 2450 | 87.6 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations. |
| YG15 | 14.0 | 1500 | 86.5 | Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations. |
Note: We can manufacure the non-standard according to your samples or drawings.
Model No.: TNMA
Features: CBN inserts
1) high hardness,
2) good wear resistance,
3) little coefficient of friction
4) good adhesiveness resistance.
Model No.: CORA
Features: suitable for wet &dry ,stone,Brick, Block and Masonry,concrete,asphalt,fast and smooth cutting,low electricity& price.3''-4''
Model No.: 0021
Features: suitable for Concrete and Asphalt .faster and smooth cutting;low electricity;longer life;low price;size:12''-36''
Model No.: CTAS
Features: suitable for stone,marble granite.faster and smooth cutting;low electricity;longer life;low price;size:3''-6''
Model No.: COAH
Features: suitable for Concrete,Aspalt.faster and smooth cutting;low electricity;longer life;low price;size:12''-36''
Model No.: GEWA
Features: suitable for stone,marble granite.faster and smooth cutting;low electricity;longer life;low price;size:4''-10''
Model No.: GWSB
Features: suitable for marble,Concrete Asphalt,stone,granite.faster and smooth cutting;low electricity;longer life;low price;size:80-200mm
Model No.: DC-CBC01
Features: drill bits for all types of rock and concrete
1,Wet drilling
2,Length:450mm
3,Application: construction
4,Size:25mm-350mm
Model No.: DIN standard
Features: machine nut taps A special tap for nuts.
Model No.: GWSJ
Features: Straight Cup Wheel (ISO Type: 6A2)
Model No.: GWSN
Features: One Side Taper Wheel (ISO Type: 4B1)
Model No.: any type is available
Features: PCD inserts
1) high hardness,
2) good wear resistance,
3) little coefficient of friction
4) good adhesiveness resistance