Blowing pump,air pump,
inflator used for cleaning dirty
for strong fasten,
The hole in the wall is between 10mm and 40mm.
Port: shanghai
Minimum Order Quantity: 2000 Piece/Pieces
Supply Ability: 2000 Piece/Pieces per Day
Payment Terms: T/T,Western Union,paypal
Contact SupplierPackaging Detail: carton size:350*350*290mm
Delivery Detail: 20days
Blow Pump
Air pressure is 5kg~7kg,the air-out pipe can be circumgyrated up to 360 and we can clear the hole in any direction. It is portable. The hole in the wall is between 10mm to 40mm.
Item/Length: BP-1 370mm
BP-2 265mm
BP-3 225mm
Packing:25 pcs/carton
Weight:5kg
Carton Size: 365mm*375mm*350mm
365mm*290mm*350mm
350mm*350mm*280mm
Plastic Sleeve and Blowing Pump Use
1. Drill holes to correct diameter and depth in air brick,, Clean the hole with a nylon brush and use Blowing Pump to blow out remaining dust.
2. Dispense a bead of adhesive off to the side to check for proper mixture (a uniform gray color)before filling the sleeve. Fill the sleeve completely as is third picture in order to avoid air pockets.
3. Close the cap and insert the sleeve into the hole.
4. Anchor rods must be clean and oil free. Insert the rod, turning slowly until it contacts the bottom of the sleeve. Do not disturb during cure time. The plastic sleeve which inserted in air brick as the second picture