airless paint sprayer graco type - DP-6695b

DP-6695b airless paint sprayer piston pump

A. EzControl 3.0

The EzControl 3.0 system will ensure you consistent fan and constant spraying pressure with low pulse and tight pressure deadband (5%).

Just set your desired pressure easily, and the microprocessor will generate the fast response when spraying

B. EzOut Manifold filter

Our EzOut Manifold filter (60mesh) will reduce the tip clogs and ensure you nice finish.

The Pump Filter could be disassembled by hand easily (no tool needed).

C. EzConnect

Our EzConnect system will let you connect / disconnect the suction tube easily without tool.

The suction tube is swivel for easy put into the paint bucket.

D. EzFlush Cleaning

The good quality prime/spray valve could be easily adjusted to Prime or Spray position. And you can easily flush cleaning the fluid passing way after spraying.

E. Chrome finishing cart with inflating wheels for easy moving.

F. Big fluid pump generate 3L volume per minute, which could be used for most kinds of residential / commercial / interior / exterior painting jobs.

1. Durable fluid pump with longest lifetime, could be interchangeable with Graco 695 / 795 / 1095

2. Stainless steel piston rod with hardened chrome finishing

3. Guaranteed quality v-packings (Teflon + leather) which is imported from KOREA.

4. Fast replacing the worn parts by using a hammer or wrench to disassemble the fluid pump.

5. The DP6695 machine could support 1 gun spraying with 523# tip at 180bar pressure, or 2 guns spraying with 517 tips at 150bar pressure.

6. Stainless wet parts could be used for both oil-based & water-based paints.

7. Equipped with 30ft (15m) 5/16” ( 8*15mm ) high pressure paint hose for less vibration and quiet performance.

8. Contents in the package: airless spray gun with tip & safety base, 15m 5/16” hose, oil, 50cm extension pole, manual.

9. Brushless TEFC DC motor is available.