1.Mircon Grain Size Wc carbide rod with high tenacity, with high quality TiAIN coating, getting long tool life
2.TRS:3800N/mm2
Port: shanghai
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 50000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: inner plastic tube,and outer export carton or as your requirement
Delivery Detail: 7-20 days after payment
TiALN Coated Carbide End Mill
HRC: 45, D1-D20 mm, helix angle: 45, 2 flute/ 4 flute
recommended for high speed machining of graphite, aluminum, cast iron or steel in dry
dry or semi-dry conditions.
(Order No) | Cutting | Flute | Shank | A.0.L |
| d | l | D | L | |
| 1.0×3×4D×50L×4F | 1 | 3 | 4 | 50 |
| 1.5×4×4D×50L×4F | 1.5 | 4 | 4 | 50 |
| 2.0×6×4D×50L×4F | 2 | 6 | 4 | 50 |
| 2.5×8×4D×50L×4F | 2.5 | 8 | 4 | 50 |
| 3.0×8×4D×50L×4F | 3 | 8 | 4 | 50 |
| 3.5×10×4D×50L×4F | 3.5 | 10 | 4 | 50 |
| 4.0×11×4D×50L×4F | 4 | 11 | 4 | 50 |
| 3.0× 8×6D×50L×4F | 3 | 8 | 6 | 50 |
| 3.5×10×6D×50L×4F | 3.5 | 10 | 6 | 50 |
| 4.0×11×6D×50L×4F | 4 | 11 | 6 | 50 |
| 4.5×13×6D×50L×4F | 4.5 | 13 | 6 | 50 |
| 5.0×13×6D×50L×4F | 5 | 13 | 6 | 50 |
| 5.5×13×6D×50L×4F | 5.5 | 13 | 6 | 50 |
| 6.0×15×6D×50L×4F | 6 | 15 | 6 | 50 |
| 7.0×16×8D×60L×4F | 7 | 16 | 8 | 60 |
| 8.0 ×20×8D×60L×4F | 8 | 20 | 8 | 60 |
| 9 ×20×10D×75L×4F | 9 | 20 | 10 | 75 |
| 10×25×10D×75L×4F | 10 | 25 | 10 | 75 |
Model No.: socket set
Features: 1/2" 24 pcs socket tool kit ( red metal box)
1. material: CRV ,s2 and 50BV30
2. various surface finishing
3. heat treated
Model No.: ST424H00
Features: Professional 1/2" DR socket deep
1. material: CRV ,s2 and 50BV30
2. various surface finishing
3. heat treatment, forge
Model No.: ST222H000
Features: 1/2"dr 6 point impact socket
1. material: CRV ,s2 and 50BV30
2. various surface finishing
3. heat treatment, forged
Model No.: ST222H000
Features: 1/2"dr 6 point impact socket
1. material: CRV ,s2 and 50BV30
2. various surface finishing
3. heat treatment, forged
Model No.: 6A2 6A9 11V9 9A3 9U111A2 12A2 1A1...
Features: PH:86 13526572721)having pores,not easy produce chips
2)excellent heat-resistance,prompt reply
3)high efficiency,easy dressing
Model No.: CY-02
Features: Wipper snipper
1.Power Source,Gas brush cutter
2.Blade Material,Metal
Model No.: CY-1202
Features: Kawasaki cutter head
1.Power Source,Gas brush cutter
2.Blade Material,Metal
3.For the nylon line(0.24-0.27cm)
Model No.: CY-1201
Features: Trimmer head
1.Power Source,Gas brush cutter
2.For the nylon line(0.24-0.27cm)
Model No.: 100127
Features: 1.used on ejectot pin
2.No carbonization,no melting,no flow out
3.1400 degree
4.White-coloured,non-staining,lubricity
Model No.: SP065PH2#
Features: Magnetic screwdriver bits
1. Material: S2, Cr-V6150, etc.
2. Different sizes available
3. Finish: sandblast
Model No.: ST2220000
Features: Professional hex bits socket 1/2"
1. material: 50BV30, CRV and s2
2. verious surface finishing
3. heat treatment, drop forged
Model No.: SP05030PH1
Features: 1/4" phillips screwdriver bits
1. Material: S2, Cr-V 6150, etc.
2. Different sizes available
3. Finish: sand blasted