Hand-hold Mining Equipment
Y19A is mainly used in samll quarries,
small coal mines and limestone mines for drilling
Port: Fuzhou port
Minimum Order Quantity: 10 Set/Sets up to you
Supply Ability: 100 Set/Sets per Day more
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: wooden case and carton
Delivery Detail: in stock
Y19A Hand-hold Rock Drill
1. Product specification
| Weight | 19kg | Working pressure | 0.4-0.5MPa |
| Outside dimensions | 600*534*106mm | Frequency of impact | 35 HZ |
| Diameter of cylinder | 65mm | Air consumption | 43L/s |
| Piston stroke | 54mm | Specification of bit shank | 22×108±1mm |
| Inner diameter of air pipe | 19mm | Impact energy | 40J |
| Inner diameter of water pipe | 13mm | Idling speed | 200n/min |
2. It can be used to drill blast-holes in engineering.
3. It can be used in the tunnel.
4.well performed
5.convenient to use and mend
6.effective
Model No.: YQ(F)-100
Features: 1000 KN pressure
It could be used for pressed connnecting conductors.
small volume
light weight easy to move
Model No.: Copper busbar bending machine CB-...
Features: Copper busbar bending machine
copper busbar bending machine is used for copper,aluminium and metal sheet
Model No.: Y020005
Features: SynBright HEAVY DUTY GEAR PULLER
* Output: 8 ton
* Reach: 210 mm
* Spread: 30-300/355 mm
* Stroke: 82-160 mm
Model No.:
Features: Furukawa F70 through bolt with lower nut
Model No.: GSA-0046
Features: Hydraulic crimping tool
1 Crimping range: Cu 6-240mm2 ,Al 6-300mm2
2 Crimping type: hexagon Crimping
3 Package: plastic cas
Model No.: CB-150
Features: Bus bar Bending Tool
It is used for copper,aluminium and metal sheet
Model No.: QY-16,40,65,100,200
Features: It could be used for pressed connnected,conductiors and conductors.
Advantage small volume light easy to move etc
Model No.: CWC-150
Features: Hydraulic Bus bar Cutter
1 It is ideal tools for cutting metal sheet up to 12mm
2 More precised cutting use lowest energy.
Model No.: QY
Features: hydraulic compressor can press-connect top and top of cables or conductors
Model No.: Y020007
Features: SynBright THREE JAW HYDRAULIC PULLER
* Output: 15 ton
* Reach: 240 mm
* Spread: 50-280/380 mm
* Stroke: 82-180 mm
Model No.: Y010018
Features: SynBright 30 TON BEARING PULLER HYDRAULIC
* Output: 20 ton
* Reach: 275 mm
* Spread: 50-360/430 mm
* Stroke: 82-180 mm
Model No.: Y020006
Features: SynBright 3 ARM HYDRAULIC PULLER
* Output: 12 ton
* Reach: 240 mm
* Spread: 30-300/370 mm
* Stroke: 82-160 mm