Wide Belt Sander Machine 630R-D Lauqcer Sander Machine
Sand-belt Speed ---adjustment speed
Port: qingdao
Minimum Order Quantity: 1 Set/Sets
Supply Ability: 50 Set/Sets per Month
Payment Terms: T/T
Contact SupplierPackaging Detail: wooden box
Delivery Detail: shipment with 30days after receipt 30% of deposit
Product Introduction:
Wide Belt Sander Machine 630R-D Lauqcer Sander Machine is a new type of lacquered panel sanding machine developed on the base of the advanced technologies from abroad. The polishing roller is made of soft rubber and has been processed by precisely dynamically balance. The speed of sand belt is controlled by frequency inverter, which can meet different requirements of various lacquer sandings. The conveyor belt is equipped with speed changers and can adjust its speed for different products, thus can guarantee good quality of lacquered products. The brushing roller installed at the out feed end of the machine can clean powder on the products. Above the sanding belt, there is a blowing tube cleaning powder on the belt. This machine is a necessity for furniture, bamboo or wooden floor manufacture
The combination between American 3M polishing wheel and soft rubber roller brings better polishing quality.
Automatic cylinder-mode cleaning device can clean the dust on the sanding belt, improve the sanding quality and lengthen the service time of sand belt.
Imported converter is used for controlling the sanding line speed, hence it is suitable for different lacquer sanding.
Model 630R-D
Material Width 630mm
Min.Operation Lenth 350mm
Material Thickness 2.5mm-110mm
Sand-belt Speed adjustment speed
Conveyor Speed 5-20m/min
General Motor 8.24kw(3+3+1.5)
Sand-belt Size 650mm*1900mm
Working Pressure 0.6Mpa
Dust Capaity 5000m3/h
Compressure Air 12m3/h
Machine Size 1800*1100*2000mm
Weight 1100kg