Whole API 13 5/8" TCI 517 TCI Tricone Bits - hj517

Whole API 13 5/8" TCI 517 TCI Tricone Bits

1)used for oil filed, water well
3)metal seal or rubber seal
4)Cerfied by API &ISO
5)FOB 100~3000$

Hejian Fanglei Drill Equipment Co., Ltd was founded in 1990, and is one of the most professional companies that specilizes in the drilling equipment. We can supply a large quantity of new and used pdc bits, tricone bits, drill pipe and drill collar etc, and various size is available. Besides, the goods have good quality and reasonable price you are interested in drill bits, please contact me now for a long time. We are waiting for cooperating with you and your company sincerely.

TCI Tricone Bits 415
Soft Formation TCI Tricone Bits
The FL 415 tci bits are used to drill low compressive strength, very soft formations.

TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters

and high projection. This cutting structure design, combined with maximum cone offset, results

in high bit penetration rates. The deep intermesh of cutter rows prevents bit balling in sticky formations

TCI Tricone Bits 535
Medium Formation TCI Tricone Bits
The FL 535 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows

. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.

TCI Tricone Bits 625
Medium-Hard Formation TCI Tricone Bits
The BW 625 features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows.

This design provides a fast drilling rate and added cutting structure durability in medium to medium

hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.

TCI Tricone Bits 735
Hard Formation TCI Tricone Bits
The BW 735 bits can be used to drill hard and abrasive formations. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge.

Maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability

and long life.