Walk behind mower 500 Series

Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used.

Models:
Greens King 500 Series
- Engine: Honda GX-120 K1QX 4-cycle, OHV, forced air-cooled
- Bore and Stroke: 2.4 in. x 1.7 in. (6 cm x 4.2 cm)
- Displacement: 7.3 cu. in. (119 cc)
- Horsepower(@ 4,000 rpm): 4 hp (2.98 kW)
- Maximum Torque(@ 2,800 rpm): 5.4 ft.-lbs. (7.5 Nm)
- Carburetor: Horizontal-type, butterfly valve
- Starter: Recoil-rope type
- Noise Level/Operator’s Ear: 79 dBa (while mowing)
Traction And Differebtial
- Drive Clutch: Centrifugal
- Traction Reduction Ratio: 21.8:1
- Traction and Reel Drive: Two synchronous Poly Chain belts and one Poly“V”Belt
- Operator Presence Control: Integral OPC/clutch design controls reel and traction drive
- Transport Wheels: Two bi-directional, pneumatic 11 x 4
- Differential: Full automotive type, housed in traction drum
- Rear Drive Drum: Machined-aluminum alloy
- Mowing Speed (@ 3,000 rpm): 3.2 mph (5.14 km/h)

Specifications:
Width Of Cut:
- Greens King 518A: 18 in. (45.7 cm)
- Greens King 522A: 22 in. (55.9 cm)
- Greens King 526A: 26 in. (66.1 cm)
Height Of Cut: (all heights depend on turf conditions and bedknife)
- Greens King 518A,522A: 0.062 - 0.109 in. (1.6 - 2.8 mm)
- Greens King 526A (7-blade): 0.156 - 0.438 in. (4 - 11.1 mm)
- Reel Diameter: 5 in. (127 mm)
- Reel Shaft Diameter: 15/16 in. (23.8 mm)
Weight (all weights on green with catcher and machined grooved roller)
- Greens King 518A:210 lbs. (95.3 kg)
- Greens King 522A:220 lbs. (99.8 kg)
- Greens King 526A:230 lbs. (104.3 kg)
Reels:
Cutting Frequency:
- 11-Blade: 0.169 in. (4.3 mm)
- 7-Blade: 0.25 in. (6.3 mm)
- Reel Clutch: Separate cog type