Vacuum Brazed Diamond Router Bit
1.High quality,long life,competitive price and performance higher;
2.Used on router machines.
Port: Shanghai
Minimum Order Quantity: 500 Piece/Pieces each size
Supply Ability: 50000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: In bulk or blister card with color card
Delivery Detail: Within 30 days after payment
Vacuum Brazed Diamond Router Bit
1. It is used for shaping the edge or curve line for various granite and marble on router machines;
2. With special diamond brazing technology, diamond is firmly brazed onto the center, which makes it is cutting effciency higher, working life longer, cost lower and performance higher.
Art No. | Diameter | Thread | Grit |
20221001 | 65mm | M14 or 5/8-11 | Coarse/Medium/Fine |
20221002 | 75mm | M14 or 5/8-11 | Coarse/Medium/Fine |
20221003 | 85mm | M14 or 5/8-11 | Coarse/Medium/Fine |
20221004 | 95mm | M14 or 5/8-11 | Coarse/Medium/Fine |
Model No.: DY124
Features: 1.various dimensions
2.high quality
Model No.:
Features: specification
model size:125mm 135mm 140mm ...
edge size: 2*2 mm 3*3mm 4*4MM 5*5MM ...
Model No.: CPMW
Features: PCD inserts
1) high hardness,
2) good wear resistance,
3) little coefficient of friction
4) good adhesiveness resistance.
Model No.: YK22015
Features: 3/4" plastic hose quick connector w/water stop.
Model No.: HSGH
Features: PCD Trapezoids
1.remove epoxy coating,sticky mastics&glue a very clean finish
2.Fit HTC machines
3. 1/3 round polycrystal
Model No.: DNHX
Features: 1.high-performance high speed steel.,
2.e.g. M2, M2AL, M35, M42, ASP2030 etc,
3.multi-cut geometry
4.ply-cutting
Model No.: DNTP
Features: annular drillSelected speical-purpose carbide tips with multi-cut geometry for ply-cutting and lower friction. Reduced damage of
Model No.: DNHL
Features: 1. super tough high speed steel
2. e.g. M2, M2AL, M35, M42, ASP2030 etc
3. with multi-cut geometry for ply-cutting
Model No.: DZFX-03
Features: adapter
Fein Quick-in/19.05 weldon(6.35mm pilot bore)
Model No.: 3.00- 4
Features: 3.00-4 Rubber Wheel
high quality low price and quality guarantee
iso9001:2008 certification
model:3.00-4
pneumatic tyre
Model No.: S14x65mmxH9
Features: tools bits of nut driver
1. Material: 50Cr
2. Different sizes available
3. Finish: sand blast
Model No.: S14x65mmxH11
Features: Professional nut driver socket
1. Material: 50Cr or 40Cr
2. Different sizes available
3. Finish: sand blast