Turbo Lap Liner (TLS-12)/Air Tools
Max.Free Speed : 14,000RPM
Air Pressure Supply: 0.63MPA
Size:196*28mm,Stroke:1.2mm
Port: SHANGHAI
Minimum Order Quantity: 50 Set/Sets
Supply Ability: 10000 Set/Sets per Month
Payment Terms: T/T,Western Union
Contact SupplierPackaging Detail: outside package is carton,the measure is 630*260*470MM,insider package is plastic casing.
Delivery Detail: within 1--20 days after receiving payment
Turbo Lap Liner(TLS-12)/Air Tools
Technical parameter:
Max.Free Speed : 14,000RPM
Air Pressure Supply: 0.63MPA
Size:196*28L,Stroke:1.2mm
Weight:180g
accessories of tools:
1) wrench:1pcs 2)collet:2pcs
3)diamond file:1pcs 4)over hose:0.4meter
5)air hose: 1.2 meter 6)hose band:2pcs
The characters and application of products
Yuetai Linear Reciprocating Grinders (Mirco Air GrinderTLL-07) adopt Japanese pneumatic dyadic turbine engine structure technology. Its advantages are as follows: small volume, good touch feeling, low vibration and noise, high speed, big torch. It can use different clamps to do grinding such as industry oil stone, ceramic fiber oil stone, file, bamboo piece, wooden piece.
Specialties
1. the accurate device of turbine structure engine of pneumatic with high torque force can reach extremely nice working efficiency.
2.Arrange high-tech. multiple tools
3.Little heat, high efficiency drive
2.Arrange high-tech. multiple tools
3.Little heat, high efficiency drive
4. Control the rotation rate according to air-condition
5.Differentiate the grinding course according to colors
6.The design of operation ergonomics principle hand is more comfortable.
Dissection of subject:
1.collet 2.shell
3.L-03crust 4.L-07crust
5.L-12crust 6.S-03crust
7.S-07crust 8.S-12crust
9.C-ring 10.inner aluminium shell
11.L-03bearing 12.S-03bearing
13.L-07,12bearing 14.S-07,12bearing
15. 16,15-A mian mast handle
15-B main mast piece
15-C main mast piece
17.03turbo 18.07turbo
19.12turbo 20.03pipe nib
21.07,12pipe nib 22.O-ring
23.03trail cap 24.07trail cap
25.12trail cap 26.intake shaft
27.O-bearing 28.O-bearing
29.screw cap 30.switch
31.snap ring 32.glue pipe
33.over hose 34.sub-tie-in
35.hexagon wrench 36.O-ring
37.O-ring
package of tools
material -consuming of tools
Maintenance of tools
1.Add oil usually(pneumatic oil or decatizing oil)
2.You should fix a separator of oil and water air pressure machine, or always clean its sewage
3.Its fever heat is normal when the tool operate without any load. Otherwise, operation with load will get cooling gradually
4.Ask professional staff to maintain the tools