1.certification API and ISO9001
2.supplier to America and Middle East
3.lowest price and highest quality
Port: Tianjin Port
Minimum Order Quantity: 1 Piece/Pieces the more the cheaper
Supply Ability: 5000 Piece/Pieces per Month more
Payment Terms: L/C,T/TContact Supplier
Packaging Detail: wooden box or iron box or as required
Delivery Detail: with in 15-30 days
TCI bits series
437 Soft Formation TCI Tricone Bits
The 437 tci bits are used to drill low compressive strength,very soft formations. TCI bits maximize the use of bothconical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure desigh, combined with maximum cone offset,result in high bit penetration rates. The deep intermesh of cutter rows prevents bits bailing in sticky formations.
517 Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide insert on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard for-mations. The HAN rubber O-ring provides adequate sealing for bearing durability.
617 Medium-Hard Formation TCI Tricone Bits
The 617 features robust chisel tunsten carbide inserts on the heel row and conical on the inner rows. This design provide a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-riprovides adequate sealing for bearing durability.
637 Hard Formation TCI Tricone Bits
The 637 bits can be used drill hard and abrasive forma-tions. Ware-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bits gauge.maxmum numbers of hemisphercal-shaped inserts are used in all rows to provide cutter durability and long life.
Steel tooth bit series
114-117 Soft Formation Tooth Bits
The 114-117bits are used to drill low-compressive strength,soft formations.Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible .Wear-resistant hard facing is used to control tooth wear.Onthe softest bit types this hard facing completely covers the bit teeth.
127 Medium-Hard Formation Tooth Bits
The 127bits are used to drill high-compressive strength,medium hard formations.Short projection teeth with reduced crest length are used in this series of bit designs.Durable hard facing is applied to reduce tooth wear.