1 high quality diamond die blanks
2 high wear resistance
3 high speed wire drawing
4 long working life
Port: Beijing, Shanghai, HK
Minimum Order Quantity: 10 Piece/Pieces
Supply Ability: 100,000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: 10pcs-50pcs/plastic bag, 10pcs/box
Delivery Detail: 7-10 days
Diamond die blanks are firmly bonded polycrystalline diamond developed through the use of our original untra high-pressure and high-temperature sintered technology, which provide strong and wear resistant wire drawing die materials.
Supreme Superabrasives Co., Ltd specializes in diamond and CBN related superhard material products and we have high reputation in the industry based on Zhengzhou, Henan province.
We research, manufacture and export of PCD wire drawing die blanks / finish die, PCD/PCBN cutting tool blanks, PDC cutters for oil/gas drilling and mining bits, PCD/PCBN cutting insert, diamond micron powder and so on.
Supreme Diamond Wire Drawing Die Blanks are Polycrystalline Diamond (PCD) products produced by ultra-high temperature and ultra-high pressure, during process diamond powders are sintered together with strong grain-to-grain bonding in the presence of several metal catalysts (containing Cobalt).
These PCD products have not only high wear resistance, hardness, and thermal conductivity, but also high mechanical strength and tenacity. They are suitable for high-speed drawing of non ferrous wires such as bronze, aluminum, and nickel and that of stainless steel and other alloy wires.
Product Code1 | ADDMA2Code | Dimension3(mm) | Max. Die4Size (mm) | Grain Size (um)5 | ||||||
D | d | T | 3 | 5 | 10 | 25 | 50 | |||
SLH2010 | - | - | 2.0 | 1.0 | - | - | * | * | * | * |
SLH2510 | D6 | - | 2.5 | 1.0 | 0.4 | - | * | * | * | * |
SLH3215 | D12 | - | 3.2 | 1.5 | 1.0 | - | * | * | * | * |
SLH4020 | - | - | 4.0 | 2.0 | 1.3 | - | * | * | * | * |
SLH5225 | D15 | - | 5.2 | 2.5 | 1.5 | - | * | * | * | * |
SLH5235 | D18 | - | 5.2 | 3.5 | 2.0 | - | * | * | * | * |
SLH6040 | - | - | 6.0 | 4.0 | 2.5 | - | * | * | * | * |
Note
1. Die blanks must be cased below 650 degree.
2. ADDMA: American Diamond Die Manufacturers Association.
3. D: Total Blank Diameter d: Diamond Diameter T: Diamond Thickness
4. Maximum recommended die size for soft nonferrous wire. Hard wire diameter normally should not exceed 65 percent of this diameter.
5. * Stock item - Order item