Professional electric airless paint sprayer - DP-6495

DP-6495 Professional electric airless paint sprayer

A. EzControl 2.0

Our EzControl 2.0 system will ensure you consistent fan and constant spraying pressure with low pulse and tight pressure eadband (5%).

Just set your desired pressure easily, and the microprocessor will generate the fast response when spraying

B. EzOut Manifold filter

Our EzOut Manifold filter (60mesh) will reduce the tip clogs and ensure you nice finish.

The Pump Filter could be disassembled by hand easily (no tool needed).

C. EzOiling

You only need to press the EzOiling red button every day before spraying, the machine will be self-lubricated and it will absolutely prolong the sprayer’s lifetime and with less parts replacing/repairing.

D. EzConnect

Our EzConnect system will let you connect / disconnect the suction tube easily without tool.

The suction tube is swivel for easy put into the paint bucket.

E. EzFlush Cleaning

The good quality prime/spray valve could be easily adjusted to Prime or Spray position. And you can easily flush cleaning the fluid passing way after spraying.

1. Light weight (16kgs) for easy carrying to up floors.

2. Durable fluid pump with longest lifetime, could be interchangeable with Graco 395 / 490 / 495 / 595

3. Stainless steel piston rod with hardened chrome finishing

4. Guaranteed quality v-packing which is imported from KOREA.

5. Fast replacing the worn parts by using a hammer or wrench to disassemble the fluid pump.

6. The DP6495 equipment could support 1 gun spraying with 519 tip at 180bar pressure.

7. Stainless web parts could be used for both oil-based & water-based paints.

8. Contents in the package: airless spray gun with tip & safety base, 15m 1/4” hose, oil, 50cm extension pole, manual.

9. Brushless TEFC DC motor will be ready in the end of 2011.

10. Both 4-legs grounded type and wheeled cart are available.