Professional and Perfect Performance 600ml/15 inches Air Caulking Gun - LY-H5

Air caulking gun

Air caulking gun instruction:

This epoxy caulking gun is suitable for 310ml,400ml,600ml soft or cartridge sealant.

Professional grade, pneumatic gun for the application and extrusion of seam sealers and adhesives,
such as silicones, poly-urethanes, acrylics, polymers, etc,

600ml air caulking gun;

cartridge: one component air caulking gun;

capacity:600ml soft packing

material:aluminum and plastic.

Body material: aluminum;

Handle:Steel

Aluminum alloy nut,attached with nozzles for replacement;

Single gun weight:1200g;

pcs/ctn:20pcs;

measurement:54x41x54cm;

G.W:15kg;

N.W:14.5kg;

Best air caulking gun,welcome your visit!

Air Caulking Gun Scope of application(tools):

1, general glass assemble,such as glass,window,and door

2, sealing,repairing and bonding the joint of other construction materials,such as aluminum,tile,some plastic and wood

3, other building or industry

Suggested Use Materials:

Epoxies, Acrylics, Silicones, Polyesters.

Epoxy Acrylates, Hybrids, Urethanes.

Polysulfides, foams, Polymers, polyureas

Air Caulking Gun Operating Instructions:

After Loading Sealant Pack:

1,Piston Operated Cartridge Applicator

Remove the front cap.

Using the cartridge, push the plunger down the barrel until it will go no further.

Tightly replace the front cap.

2,Sachet Applicator

Ensure the desired nozzle is fitted to the front cap.

Using a new sachet, push the floating plunger down the barrel until it will go no further.

Cleanly cut off the end of the sachet or crimped clip where present.

Tightly replace the front cap.

3,Operation of the trigger:

By pulling the trigger, a cushion of compressed air builds up inside the applicator to initiate the flow of sealant. On releasing the trigger, the sealant flow ceases as the compressed air escapes rapidly by a silenced quick exhaust valve at the rear of the gun..

Air caulking gun caution:

1.Always disconnect the air line prior to dismantling the applicator.

2. To ensure trouble-free operation of the applicator, it should be wiped clean of all sealant residue after use with the sealant manufacturers recommended solvent.

3. Front caps should always be secured tightly during use.

4. It is recommended that safety spectacles are worn when using all pneumatic tools.

Air caulking gun picture:

Company introduction:

Hangzhou Xin Da Li Yu Hardware Co., Ltd , formerly called “Hangzhou Liyong Tool Co., Ltd.” established in May 1995, is a professional enterprise engaged in production, design, research and marketing of hardware and tools. It mainly produces hand tools such as Caulking gun, Paint Mixer, wall scrapper etc.

After great efforts in the past years, its products, covering more than a hundred kinds under nine categories instead of few types when the plant was newly established, have been widely accepted and highly recognized by clients in Europe and the USA. It produces more than 3 million sets of Caulking gun, Paint Mixer and other tools annually.

The Company always adheres to the operation tenet of “customer first, credit first, seeking for innovation and perfection”. We warmly welcome your visit and patronage, and expect for sincere cooperation and joint development.