Pre-tension lifting chain sling 2.5Ton for hoist and crain - NBNG-01

Pre-tension lifting chain sling

When you do hoist work and crane work, have you ever failed to hook just before lifting?

Please use our product in this case.

You can change the length of the chain by pulling it easily by hand.

The length of the part painted red of the chain gets longer 150mm by pulling it.

Since it is pulled by the power of the spring, if you release, it will return.

Since the hook is pulled by the power of the spring, it does not come off.

Since a hook does not come off, you can work easily and safely.

We design the lifting angle at up to 60 degrees.

Please specify the length of a chain according to your use among 300 to 1200 mm.

This Pre-tension sling has four-point lifts specifications, too.

When you lift a bad thing of the balance and when you lift the article approximately Safe Working Load limit, this Pre-tension sling can scatter load.

When you use a chain sling for four-point lifts of other companies by yourself, have not you felt that you are hard to use ?

The mechanism is the same as two-point lifts.

We have confidence about the quality of the product.

We estimate it even from one piece of drawing.

We can produce the artefact of the metal product and of the resin product.
We produce the product according to needs of the customer from a design to surface treatment and sell it.
If there is some annoyance, please talk with us.

Surely we should be useful.

Welcome to contact us by E-mail or online ,we will give you prompt and carefully reply.

Seeing is believing, we sincerely invite you to visit our factory, we believe you will satisfy with our products.

Please visit our URL for more details:

http://www.auzac.jp/en/index.html

Small quantity and trial order can be accepted./Sample order accepted.

Our products are strictly under the control of ISO9001 QC system.

Instructions in the business

Payment Terms: 100% advanced payment before shipment only

Inquiry

We reply your inquiry as soon as possible.