Plug Cutter
1. High precision, high efficiency;
2. Long life.
Port: Shanghai
Minimum Order Quantity: 200 Piece/Pieces each size
Supply Ability: 50000 Piece/Pieces per Month each size
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: In bulk, we also can offer the package as the clients' requirements.
Delivery Detail: Within 45 days after payment
Plug Cutter
A plug cutter cuts a tapered hole in the face grain of a board. The plug is then either trimmed or snapped off from the wood remaining in the center of the hole. Because of their tapered shape, these wood plugs can be coated with glue and then tapped firmly into a hole to form a snug fit.
Because plug cutters don't have a center spur, it's best to use them in a drill press. If you don't have a drill press you can get around this by drilling a hole in a piece of scrap plywood to hold the plug cutter in place. The hole should be slightly larger than the outside diameter of the plug cutter.
Size | Shank Size | Art Number |
1/4" | 1/4" | 30902001 |
3/8" | 3/8" | 30902002 |
1/2" | 3/8" | 30902003 |
5/8" | 3/8" | 30902004 |
6mm | 6.0mm | 30902005 |
8mm | 9.5mm | 30902006 |
10mm | 9.5mm | 30902007 |
12mm | 9.5mm | 30902008 |
14mm | 9.5mm | 30902009 |
16mm | 9.5mm | 30902010 |