PDC cutters for oil/gas drilling bits
We have SG, GK series available.
SG series of cutters
Port: any port
Minimum Order Quantity: 50 Piece/Pieces
Supply Ability: 100000 Piece/Pieces per Month
Payment Terms: T/T,Western Union
Contact Supplier
Packaging Detail: usual packing
Delivery Detail: 15 days after receiving payment
Feature:
The joint face of PCD layer and the tungsten carbide is designed with claws, which ensure the combination is more firm and the cutter has higher impact resistance.
Microstructure with complete C-C bond combination is characterized between the grains of the diamond in PCD layer, which ensure the high strength, hardness and abrasion resistance of diamond layer.
The new sharp cutting surface will keep cutting in the drilling process.
GK series of cutters
GK is a premium cutter, we adopted series of new technology, greatly improved the impact resistance and thermal stability, increased the rate of penetration in highly demanding drilling applications effectively.
Feature:
Selected higher quality diamond powder, improved the sintering technique, enhanced the bond combination strength between diamond grain.
Improved the inner structure of the sintered cavity, the pressure and temperature become more balance, which ensure the cutter has more stable performance.
Adopted a new type of carbide, which improved the weld strength.
Optimized the designation of joint face, which reduced the residual stress.
Increased the rate of penetration in highly demanding drilling applications effectively
Application: Suitable for drilling medium to hard, hard and tough formations.
| Specification | 0808 | 1308 | 1313 | 1608 | 1613 | 1616 | 1913 | 1916 | 1919 |
| Diameter(mm) | 8.20 | 13.44 | 13.44 | 16.00 | 16.00 | 16.00 | 19.05 | 19.05 | 19.05 |
| Height(mm) | 8.00 | 8.00 | 13.20 | 8.00 | 13.20 | 16.00 | 13.20 | 16.00 | 19.00 |
Model No.: as you required
Features: hard metal products
They are cemented carbide products, and we assure you of our best quality and workable price.
Model No.: as you required
Features: cemented carbide products
we can produce various kinds of cemented carbide rods, at the same time, we welcome your inquiry.
Model No.: as youi required
Features: carbide stick
Our company--Suzhou Ruisen Cemented Carbide Co.,Ltd is specialized in producing the various cemented carbide prod
Model No.: as you required
Features: carbide button
This is our company's cemented carbide products, it is use for rocking drilling tools .
Model No.: CTAX
Features: Metal Bond Continuous Rim Diamond Fine Squaring Cup Wheel
good quality professional
low price long life
Model No.: QR14-50-50B, POH14-50CR
Features: guide bar Features:
1) Parameter:
a) QR14-50-50B 3/8 .050 50X as OREGON'S NO 140SDEA074
b) POH14-50
Model No.: PO16-50CR, 69116AR
Features: guide bar Features:
1) Parameter:
a) PO16-50CR: 3/8 .050 57X as GB'S NO PO16-50CR
b) 69116AR: 3/8
Model No.: QR16-56-50A, QR16-56-50B
Features: guide bar Features:
1) Parameter:
a) QR16-56-50A: 3/8 .050 56X
b) QR16-56-50B: 3/8 .050 56X as O
Model No.: tp-
Features: Carbide grit hole saw:
1:can cut ceramics, bricks,hardwood...
2:They can cut big size holes in those building materials
Model No.:
Features: Segmented diamond blades
*Concrete, block, brick, stone, steel reinforced concrete. Angle grinders
*best life and cut rate
Model No.:
Features: Carbide End Mill
General Purpose, TiAlN Coated, 3 Flutes, Square End, 1/2" Cutting Length, 1/8" Cutting Diameter
Model No.: die/mould
Features: square-shape die:We could make dies according to customer's requirement.