1.PDC coring bit/PDC core drill bit/PDC manufacturer
2.PDC coring drill bit for water well drilling,geothermal drilling,Oil/gas
Port: Zhengzhou OR any ports as requested
Minimum Order Quantity: 5 Piece/Pieces Can Negotiation
Supply Ability: 300 Piece/Pieces per Week Can be enhance
Payment Terms: L/C,D/A,D/P,T/T,Western Union
Contact Supplier
Packaging Detail: In a carton or as requested
Delivery Detail: Within 3~15 days after order confirm
1.Overview of PDC core bits
PDC core bits incorporating PDC (Polycrystalline Diamond Compact) cutters can be very cost effective and very productive, which are applied to rock formations of f≤10, mainly used for geological and hydrology drilling.
We have two main types of core bits are available: rib core bits and flat core bits.
The rib core bits are applied to rock formation of f≤6, like mudstone, sandstone, etc. And the flat core bits are applied to rock formations of f≤10, like limestone, granite, etc.
2.Feature of PDC core bits
LD PDC core bits adopt 2 cutters, flat and dome-shaped cutters.
The flat cutters have high abrasion resistance and fast drilling efficiency, suitable for drilling integrate formation.
The dome-shaped cutters have high impact resistance and stable drilling performance, suitable for formations with hard interred layers.
LD PDC core bits diameter is from 60mm to 171mm, any special design is available upon customers' request.
3. Reference Types of PDC core bits
PDC flat core bits
Type | D(mm) | Teeth | Note Information | |
QXP-6 | 60,75 | 6 | 1.Sizes: Above as standard type sizes; | |
QXP-6 | 94,98 | 6 | ||
QXP-8 | 8 | |||
2. Teeth: All sizes can do 4T/6T/8T/12T or as requested. | ||||
QXP-6 | 113 | 6 | ||
QXP-8 | 8 | |||
QXP-10 | 10 | 3. Thread: Sizes and Outside/Female thread as requested. | ||
QXP-10 | 133 | 10 | ||
PDC rib core bits
Type | D(mm) | Group | Note Information | |
QXL-4 | 94,98 | 4 | 1.Sizes: Above as standard type sizes; | |
QXL-5 | 5 | |||
2.Group: All sizes can do 4G/5G or as requested. | ||||
QXL-4 | 113 | 4 | ||
QXL-5 | 5 | |||
3.Thread: Sizes and Outside/Female thread as requested. | ||||
QXL-5 | 133 | 5 | ||
Note: Special design is available upon customer's request.
Model No.: Diameter(in):3-7/8,8-1/2,9-7/8,12...
Features: 1.PDC oil blade bit manucaturer
2.PDC oil blade bit M123/122,M223/243/232,M323/333,M423,M841
3.For oil/gas/petroleum
Model No.: 5mm-100mm
Features: Diamond Core Drill Bit
1 fast drilling speed,
2 high efficiency and less chipping,
3 minimum material deformation4 long life
Model No.: 0608,0808,1004,1008,1313,1608,161...
Features: 10mm,13mm,16mm,19mm oilfield and mining PDC cutter
High wear resistance,high impact resistance PDC cutter with different sizes
Model No.: Drag bit GD series
Features: 1.3-Wings drag bit
2.PDC drag bit/TC drag bit Manufacturer
3.Drag bit drilling faster&good efficiency for soft rock formation
Model No.: 5mm-100mm
Features: Diamond Core Drill Bit
1 fast drilling speed,
2 high efficiency and less chipping,
3 minimum material deformation4 long life
Model No.: Chisel Bits
Features: 1.Chisel Bits manufacturer
2.Chisel Bits for coal mine, iron mine, quarry
3.Tungsten carbide TC chisel Bits
Model No.: PDC core drill bit QX series
Features: 1.PDC core drill bit
2.PDC core drill bit high drilling efficiency
3.PDC core drill bit for geological & hydrology drilling
Model No.: PCD bit,3,4,5,6wing available
Features: PDC bit for core and nocoring Manufacturer
PDC bit for oil/gas drilling, geology exploration,water well drilling,geothermal
Model No.: PDC non coring bits NW series
Features: 1.PDC non coring bit Manufacturer
2.PDC non coring bit for medium to hard formations
3.Higher drilling efficiency,long life
Model No.: PCD roof drill bit MG series
Features: PDC anchor shank bits/PCD roof drill bit for roof bolter,bolt mesh support,coal mine,coal bed,coal seam
Model No.: W111
Features: 1.Specification:26'' 660.4mm
2.IADC:111
3.material:high manganese steel
4.WOB:0.20~0.70 KN/mm
5.sealing:metal or rubber
Model No.: W121
Features: 1.Specification:12 1/4'' 311.2mm
2.IADC:121
3.material:high manganese steel
4.WOB:0.20~0.70 KN/mm
5.sealing:metal or rubber