All products with Certificate ISO9001
Ten years manufacture experience
Long-term supply of PDC bit
Considerate after service
Port: Qingdao
Minimum Order Quantity: 30 Piece/Pieces
Supply Ability: 1000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: Inside in sponge & Outside in wood case
Delivery Detail: 7 Days
PDC Anchor Shank Drill Bit
Introduction
Henan zhongmei can supply all kinds of PDC Coring and non-coring bits, PDC sintering matrix bits and PDC anchoring bits. PDC bit can be widely used in the fields of geological exploration, coal mining, water conservancy and hydropower, construction of road and railway. We also can design PDC bits according to customer requirements, such as different geological condition, special strata and so on.
PDC Cutter
PDC(polycrystalline diamond compact) anchor shank bit is a new product after the hot-pressed and electroplated drill bit recent years.With special hith-frequency weldin techniques.PDC of high wear resistant si welded to the body as cutting edges.PDC bit is mainly used for geological prospecting,coal exploration,water conservancy and power engineering,etc.
Characteristic
High wear resistance and impact-resistant toughness; long drilling life, drilling efficiency can be promoted sharply in penetration of soft and medium soft formation; laber intensity can be reduced.
Feature
1. It has a super long life. The grinding/consumption ratio of PDC is 20-40 times that of tungsten carbide bit and 10 times that of diamond bit.
2. It had high drilling speed.
3. It can be operated with low pressure and low speed.
4. It has a good gage protection.
5. It can be used widely, more suitable for drilling in the stratum with formation<7
6. It has a low cost
Application
Apply to the anchor-network support hole drilling in coal mine, transportation, hydropower, and so on.
Specification
Colliery Drilling Tools | Main Standard(mm) | |||
D | H | L | M | |
Thread joint | 27 | 44 | 17 | M14×1.5 |
27 | 54 | 17 | M12×1.75 | |
28 | 54 | 20 | M12×1.75 | |
29 | 52 | 18 | M14×1.5 | |
30 | 50 | 18 | M14×1.5 | |
32 | 52 | 22 | M14×1.5 | |
32 | 56 | 22 | M12×1.75 |
Note: For detailed specification, non-standard drill tools or any questions, please feel free to contact us.