1.Expert Manufacturer of Non Core Drill Bits
2.Drill Bits with the Certificate of ISO9001
3.Recieve Many Good Feedback
Port: Dalian
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 1000 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: inside in sponge, outside in wood case
Delivery Detail: 7 days
Introduction
PDC bit uses PDC as main cutting components, with the excellent wear-ability and impact toughness of the PDC. It has a useful life, high-efficiency, and good performance cost ratio.
Henan zhongmei can supply all kinds of PDC Coring and non-coring bits, PDC sintering matrix bits and PDC anchoring bits.
Theory
PDC(polycrystalline diamond compact) drill bit is a new product after the hot-pressed and electroplated drill bit recent years.With special hith-frequency weldin techniques.PDC of high wear resistant si welded to the body as cutting edges.
Features
1. It has a super long life. The grinding/consumption ratio of PDC is 20-40 times that of tungsten carbide bit and 10 times that of diamond bit.
2. It had high drilling speed.
3. It can be operated with low pressure and low speed.
4. It has a good gage protection.
5. It can be used widely, more suitable for drilling in the stratum with formation<7
6. It has a low cost
Applicaton
PDC bit is mainly used for drilling soft and medium formation, it work under low drilling pressure,midium-low speed,big drainage.
Specification
PDC Non-coring Bit is a kind of full face bit, it is mainly used for coal mining, water canservancy and hydropower, road construction, railway, bridge and building.
Specification diameter(mm) | Size | Cutting Wings | Water Hole | Threading | Rock Formation | |||
Dia(mm) | Height(mm) | Pillar Quantity | Blade Quantity | Quantity | Quantity | |||
56 | 56 | 115 | 2 | 3 | 4 | 6--8 | Square Taper Lock | F<7 medium hard (Dagstone; sandstone; Limestone) |
60 | 60 | 115 | 2 | 3 | 4 | 6--8 | ||
65 | 65 | 115 | 2 | 3 | 4--5 | 6--8 | ||
75 | 75 | 125 | 2 | 3--4 | 4--6 | 6--10 | ||
78 | 78 | 128 | 2 | 3--4 | 4--6 | 6--10 | ||
85 | 85 | 128 | 2 | 3--4 | 4--6 | 8--12 | ||
94 | 94 | 128 | 2 | 3--4 | 4--8 | 8--12 | ||
113 | 113 | 135 | 3 | 3--4 | 6--8 | 8--12 | ||
133 | 133 | 135 | 3 | 3--4 | 6--8 | 8--12 |
Note: We are also can design and manufacture of various non-standard drill tools.