Product Features:

Chain saw

we have 25cc,36cc,38cc,45cc,52cc,55cc,58cc,72cc CE,GS

2-stroke,1-cylinder,air-cooling

Easy start is available too

Business Terms:

Port: ningbo/shanghai

Minimum Order Quantity: 200 Piece/Pieces

Supply Ability: 15000 Piece/Pieces per Month

Payment Terms: L/C,T/T,Western Union

Contact Supplier

Specifications and Product Details:

gasoline CHAIN SAW

specification:

Item No.	RQ07-CS4500
Ignition system	C.D.I
Dimensions (without guide bar and chain)	410 x 235 x 265 (mm)
Fuel	Mixture (Gasoline 25: Two cycle oil 1 )
Fuel tank capacity	230 (ml)
Oil tank capacity	160(ml)
Engine displacement	45(cc)
Maximum engine power	1.8kw / 8000rpm
Maximum engine speed with cutting attachment	11000rpm
Maximum engine speed at idling	3000rpm
Maximum cutting length	38 (cm)
Sprocket	7T x 0.325
Saw chain type	K2 (CARLTON)
Saw chain pitch	0.325(in)
Saw chain gauge	0.058(in)
Guide bar type	Sprocket nose
Guide bar size	16" / 18"/20"
Oil feeding system	Automatic pump with adjuster
Cylinder size	40*32mm
Anti-vibration	3pcs of rubber anti-vibration system
Packing size	402728cm
Loading Quantity	1020pcs/20" FCL; 2250pcs/40" HQ

Gasoline Chain Saw Precautions:

1) Must be familiar with instruction before using the chain saw, in strict accordance with the requirements of operating instructions to ensure the safety and life cycle of the product.

2)Pay attention to the tightness of chain guide(hand pull the chain, the chain and guide spacing of 1 cm) during the installating process , or else it will influence the effects.

3) Mixture of gasoline and oil rating is 25:1, but due to regional differences in the quality of oil, we recommend a ratio of 20:1, recommended engine oil as the Mobil brand two-stroke engine oil.

4) For the first time,it must first start the machine for 5 minutes before working.

5) After operating , must wait for the chain guide under the oil before working(oil pump).

6) Affected by the transport, chain saw may be screw loose, tighten according to the instructions before using , in general, not recommended disassembling.

7)Before using, carburetor must be cleaned after every 100 hours working.

8) Air filter must be cleaned after every 8 hours working.

9) Chain should be replaced if blunt, or else it will affect the effects and the chain saw life cycle.

10) When not in use it is better to be packed by plastic bags, avoiding dust and moisture into the machine.

11) 25F chainsaw largest guide the chain's configuration is: 12 inches; 45F chainsaw largest guide chain configurations: 18 inch; 52F chainsaw largest guide chain configuration for 20-inch; 62F chainsaw largest guide chain configuration for 22 inch. May cause the high temperature over the range of possible machine configurations temperature, then turn off, influence the using effect and machine life cycle( use the above models, chain guides should be reduced by 2 inches for the benefit in summer).

pcaking:

about us:

Welcome to inquiry! High quality, competitive price and best service, we are right here waiting for your visit!