KZLS Pneumatic bundling Machine - KZLS

KZLS Model Pneumatic bundling Machine

Include KZL-19/25/32/40 Model pneumatic tensioner and KZS-19/25/32/40 pneumatic sealer ,please check its technic parameter in the follwoing:

KZL-19/25/32/40 Model pneumatic steel strapping tensioner

Strap material: steel strap

air pressure: 0.4~0.6Mpa

steel strap spec: (25~32)*(0.8~1.2)mm

: (0.984″-1.25″)×(0.0315″-0.0472″)

Tentioning speed: 5.3m/min

tension: ≥9.8KN/0.6Mpa

weight: 4.8kg(10.58 lbs)

KZS-19/25/32/40 pneumatic steel strapping sealer

Air pressure: 0.45~0.6Mpa

Specification: (25~32)*(0.8~1.2)mm

: (0.984″-1.25″)×(0.0315″-0.0472″)

strap way: trapping buckle

Tensile strength: ≥16.8KN

Weight: 3.5kg(7.716 lbs)

FEATURES:

KZL-32 Pneumatic Steel Strapping Tensioner and KLS-32 Pneumatic Steel Strapping Sealer are new-type machines and have top quality and higher degree of mechanization.These two machine must used together to finish the act of binding up or fastening(tension,seal and cut).

introduction:

KZL-32 Pneumatic Steel Strapping Tensioner is lightweight, compact pusher-type model. Its tightening force is freely selected by air pressure adjustments.

KLS-32 Pneumatic Steel Strapping Sealer is driven by compressed air to perform hoop sealing instantaneously. These Units are lightweight and compact. All you need to do is to hold either one of them with a single hand, put it on the seal, and push the button.

Applycation:

It applies to steel bar products,pipes products, Building Materials,plank stuff ,Ingot-material plate,etcIt is pneumatic mode tools,with light weight,safe and convinent operation,strong banding power,well-locked,low labour intensity and easy to use.

A Filter-Regulater-Lubricator is needed~!