IRDA Welder T862++, bga rework station, bga repair station, hot sell - T862++

*work floor size:120X120mm, *power:800W, *preheating:15x15-35x35mm... - more info check here: //www.buyindustrialtools.com/IRDA-Welder-T862-bga-rework-station-bga-repair-station-hot-sell-10083486/

Quick Brief

Place of Origin: Guangdong China (Mainland) Brand Name: Telesailor Model Number: T862++ Feature: Cool / Hot Air, Temperature Adjustable... Temperature: 100-350 Rated Duty Cycle: 50HZ/60Hz Dimensions: 36*33*34 cm Weight: 11KG Usage: for PCB board chipset welding Telesailor: BGA welder Working voltage: AC220/110v Output power: 800W heating source: infrared Current: 2.5A

Product Features:

*work floor size:120X120mm

*power:800W

*preheating:15x15-35x35mm...

Business Terms:

Port: Shenzhen or Guangzhou

Minimum Order Quantity: 1 Set/Sets

Supply Ability: 10000 Set/Sets per Day

Payment Terms: T/T,Western Union,Paypal

Contact Supplier

IRDA Welder T862++, bga rework station, bga repair station, hot sell

Specifications and Product Details:

Can suitable for all of the component,especially Micro BGA component.
1. Adopt infrared weld technology which independent exploration.
2. Use infrared heat,it is easy to cut through,heat proportion piercing tradition weld machine with sirocco.
3. Easily operate.Just need one day training.Can operation this machine.
4. No need weld tools,it can weld all the component of 15x15-35x35mm.
5. This machine has 650W heating system.widely to 120x120mm.
6. Infrared heating no have sirocco flow. Don't impact perimeter scomponent. Can suitable for all of the component,especially Micro BGA component.

Parameter
Working voltage AC220/110v 50/60Hz
Output power: 800W
Temperature: 100-350

Operation method

1. Locate, choose and attach the appropriate lens:

The usable of the lenses diameter are 28mm, 38mm, 48mm.

(1)When the area of the chips is below 15mm*15mm, please choose the IR-lamp temperature about 160-240, and choose the lens which D=28mm to avoid destroying other places, usually it will take you about 20-40seconds.

(2)When the area of the chips is between 15mm*15mm and 30mm*30mm, please choose the IR-lamp temperature about 240-320, and choose the lens which D=38mm to avoid destroying other places, usually it will take you about 30-60seconds.

(3)When the area of the chips is above 30mm*30mm, please choose the IR-lamp temperature 350(Attention: you should turn on the pre-heat dish first, and set-up the temperature about 150-200,wait 3-5minutes to allow the temperature steady on the set-up temperature),and choose the lens which D=48mmto avoid destroying other places, and keep the lamp body direct light. You should control the time carefully to avoid burning the chips.