Hydraulic Punch.
Punching through I-Beams, H-Beams, Mild steel, etc.
Payment Terms: L/C,T/T
Contact Supplier
ISO9001/ISO14000 Certificate and CE Mark.
An exclusive equipment to punch holes at H-beam, channel, angle plate with
maximum accuracy.
A small, light, simple type to operate it at any place and any direction.
Allows to significantly reduce the time needed to make hole in comparison to drilling.
Double-acting, hydraulic return, solenoid valued pumps are standard.
Punches and dies are easily changeable, and special purpose blades for
copper or aluminum plates are available.
Model | Max. Punching Diameter(Φ) | Max. Punching Thickness (mm) | Max. Center Depth (mm) | Time | Cylinder Capacity (tons) | Pump | |
TPUN-2410 | 22 | 10 | 70 | 1Hp | 6sec | 32 | 1HP Single |
TPUN-2410 | 22 | 10 | 70 | 1Hp | 6sec | 32 | 1HP Double |
TPUN-2416-07 | 24 | 16 | 70 | 2HP | 5sec | 47 | 2HP Double |
TPUN-2416-11 | 24 | 16 | 110 | 2Hp | 5sec | 47 | |
TPUN-2420 | 24 | 20 | 110 | 3HP | 6sec | 60 | 2.3HP Double |
TPUN-3222 | 32 | 22 | 110 | 3HP | 6sec | 85 | 3.5HP Double |