Hot Melt Glue Gun - NL-207

Item:hot melt glue gun

Type:NL-207

Brand:NYLEO

Application: For the stick of the diameter is 10.8--11.5 mm.

voltage: AC:100--230 V

Temperature: 200--240degree

P.W: 100--200W

The nozzle diameter :2.0--2.5mm

melted glue per minute:10--15g

Packing: bubble pack

Qty: 36pcs

N.W: 14.0kg

G.W: 18.0Kg

DIMENSIONS: 52.5×29×69.5CM

Characteristics

1.The heater component of the product is make of Positive Temperature Coefficient Electric resistance(PTC).It's heating very fast and automatic of control temperature.The hot melt glue gun can use nomally in 100V to 240V electrical,inside place the fuse,use more safe.

2.The heater body installment was designed to insulates heat .it's work long life

Application

1.the toy model industry

2.Artifical Flowers,chrismas tree

3.Decorations,the metals product

4.the wood product

5.Electronic circuit plak

Operation is show

1. This series product can use the diameter from 10.8mm to 11.5mm of melt glue

2.Insert the glue from the glue gun tail.sent to the gun tube.Plug the glue gun electrical outlet to preheating from 5 to 8 mintes.button up to move the trigger and can extrude the melt glue. and can control the melt glue quantiry.

3.While it's working.if the melt glue is inexhaustibility in one time.then the melt glue need not take out.It will re-melt and be used the next time you use your glue gun.

Caution

1.The hot melt glue gun is a high temperature product.if the customer used the size of the melt glue that types not agree with.It would causethe melt glue reflux and damage the glue guns

2.Don't touch the nozzle area and melted glue .for they are high temperature when they working.Forbid to use in the situation that easy fuel and explode easily.

3.While it's working,don't raise it.and the nozzle can't upward.if the glue gun doesn't work continuously for 15minutes.please unplug the electrical.In order to prevent the melts glue to pour from the glue gun to damage it as all.

4.The new glue gun while useing for the first time.it may emit a little smoke.This is normal and should cease after a few moments

5. Should usually keep the slippery piece of the glue gun tail sweep.for the melt glue can send into the gun Tube smoothly.forbid to pull out the melt glue from the glue gun tail parts

6.The glue gun should keep dry in teh airness of place .out of the reach of children

7. This tool at not use must place at if of support up.

8. Never use the glue gun if the power cable.or any part of the glue gunappears damagerd or loose.There are no use serviceable parts in this glue gun.