1.3+1 diamond router bits
2. This shank-type router bit is for sizing and diving cuts on CNC routers
Port: Guangzhou
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 300 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: blue plastic box
Delivery Detail: two to three weeks
1. diamond router bit 3+3
2. high performance tool for rough and finish milling
3. used for cutting particle board and MDF panels,melamine and paper laminated
4.with diamond plunge insert for diagonal
5.n.max=2400rpm/min
6.resharpenable for 6 to 8 times
7. It is nickel coated to prevent from rust
code for right hand | code for left hnd | diameter | cutting length | shank | total length | Z | height of tip |
010 | 013 | 20 | 28 | 20 | 90 | 3+1 | 4 |
020 | 023 | 20 | 37 | 20 | 96 | 3+1 | 4 |
030 | 033 | 20 | 45 | 20 | 105 | 3+1 | 4 |
040 | 043 | 20 | 28 | 25 | 96 | 3+1 | 4 |
050 | 053 | 20 | 37 | 25 | 105 | 3+1 | 4 |
060 | 063 | 20 | 45 | 25 | 105 | 3+1 | 4 |
070 | 073 | 25 | 28 | 25 | 96 | 3+1 | 4 |
080 | 083 | 25 | 37 | 25 | 105 | 3+1 | 4 |
090 | 093 | 25 | 45 | 25 | 113 | 3+1 | 4 |
100 | 103 | 25 | 55 | 25 | 123 | 3+1 | 4 |
Here are photos of our diamond router bit (3+1 type)