1. Type:M10*1
2. Material:HSS
3. Helicoil Drill:10.3mm
4.Application:insert helicoils
5.Hot selling,welcome your inquiry
Port: ShangHai
Minimum Order Quantity: 10 Piece/Pieces
Supply Ability: 3000000 Piece/Pieces per Month
Payment Terms: T/T
Contact SupplierPackaging Detail: plastic box
Delivery Detail: 5-10days
HELI-COIL INSTALLATION TOOLS
There are two types of Heli-Coil tools supplied in kits -threaded
mandrel type and prewinder type.
The prewinder tool is supplied in some coarse and all fine thread
kits and sets. These inserts must be reduced in diameter before
they are threaded into the tapped hole.This is accomplished by
winding the insert through a set of threads called a prewinder at the
front of the tool. Generally, coarse thread inserts can be installed
just as they come from the package so a simple threaded mandrel
type tool is supplied in the kit or set.
INSTALL
Install the appropriate length insert from the kit. Use the installation
tool supplied in the kit or set. Wind the insert into the hole until the
top coil is1/4 to 1/2 turn below the top surface.
CL-Excellent Equipments
CL-Other Main Products
http://www.helicoil.asia
http://www.cljsh.com