FSC-056YJ Crimping Tool
Tool Parameter:
Capacity: 4,6,10,16mm2 AWG: 12-6 AWG
Length: 223 mm Weight: 0.73 Kg
Port: Ningbo
Minimum Order Quantity: 300 Piece/Pieces
Supply Ability: 30000 Piece/Pieces per Month
Payment Terms: L/C,T/T
Contact Supplier
Packaging Detail: 1 pc/bag
Delivery Detail: Within 45 days after receive full payment.
FSC-416TX Super Strength-Saving Mini-Type Crimping Plier
Tool Parameter:
Capacity: 4,6,10,16mm2AWG: 12-6 AWG
Length: 223 mm Weight: 0.73 Kg
1.For crimping non-insulated terminals.
2.Crimping range: 12-6AWG (4,6,10,16mm2)
3.Precicise crimping die sets and integral lock with self releasing mechanism ensure high-quality crimping effecting after crimping repeatedly,.
4.Scientific leverage design saves energy when operating
5.Release locking if operates error.
6.Provided with one set of dies in handles for using easily,
7.Energy saving by humanization handle design.
Model No.: CB-200A
Features: hydraulic brass bender CB-200A
It is suitable for bending copper/aluminium sheet with the width of the sheet up to 200mm.
Model No.: CP-390
Features: Manual pump CP-390.
It is used together with other split unit hydraulic tool,such as hydraulic jack,
Model No.: FYQ-630
Features: split-unit hydraulic crimping tool FYQ-630.
it is used to crimp up to 630 sq mm Cu/Al termitals.
press range is 150-630mm2.
Model No.: FYQ-300
Features: split-unit hydraulic crimping tool FYQ-300.
the crimping range is from 16-300 sq mm.
Model No.: CYQ-400C
Features: hydraulic Plier CYQ-400C.
hand operated compression tool features a two stage rapid advance pumping system.
Model No.: CAC-75
Features: angle iron cutting tool CAC-75.
It is suitable for cutting angle iron.
the thickness of the sheet is 7mm,output:30T.
Model No.: CH-20
Features: hydraulic Puncher CH-20
Dig the copper/aluminium sheet of 10mm
It is specialized for angle steel, flat steel, brass plate.
Model No.: FHS-10
Features: hydraulic flange psreader FHS-10
For maintenance,commissioning ,shutdown,testing and valve change outs
Model No.: CK-8
Features: hydraulic puncher CK-8
hydraulic hole digger CK-8
It is made from aluminium
It is forcing-saving and easy to operate
Model No.: HY-16
Features: hydraulic steel bar cutter HY-16
It's cut steel bar up to 16mm
Model No.: FHS-10
Features: hydraulic flange psreader FHS-10
For maintenance,commissioning ,shutdown,testing and valve change outs
Model No.: CB-150A
Features: hydraulic brass bender CB-150A
For bending copper and aluminum
It is used to bend Cu/Al sheet with the thickness up to 10mm