Electrical Crimping Tool
1.Model no.:EM-6B1 B2
2.crimping from 0.25mm2 to 10mm2 and Cu/AI cutting in 7mm
Port: SHANGHAI / NINGBO
Minimum Order Quantity: 1 Piece/Pieces as customer request
Supply Ability: 1000 Piece/Pieces per Month as customer request
Payment Terms: L/C,T/T,Western Union
Contact SupplierPackaging Detail: one piece in one carton
Delivery Detail: within 10days after receiving order confirmation
Type EM-6B2 is an ideal crimper for connection in cabinet. It is applicable for pre-insulated terminal crimping from 0.25mm2 to 10mm2 and Cu/AI cutting in 7mm. It is supplied with seven kinds of accurate and replaceable die sets. The crimper has high working efficiency and wide application.
The crimper is driven by fixed speed motor so that it owns advantages of high efficiency and high quality not only in crimping force but crimping speed. It is good for terminal crimping in large or medium quantity. If there are a lot of different kinks of terminals to be crimped, this crimper is the best choice.
Model | EM-6B1 | EM-6B2 |
Output | 12.7KN | 12.7KN |
Max crimping Force | Insulated Terminal 5.5mm2 | Insulated Terminal 5.5mm2 |
crimping Time | 1.5s(60Hz) | 1.5s(60Hz) |
1.8s(50Hz) | 1.8s(50Hz) | |
Volts | AC100-125V | AC200-230V |
Power Consumption | 90W | 90W |
Dimension | 325*265*150mm | 325*265*150mm |
Weight | 12Kg | 12Kg |
Types of Applicable crimping Tools | |||
Model | Scope | Terminal | |
AWG | DIN | ||
LY-03C | 20-10 | 0.5-6 | Insulate terminal |
HS-10 | 18-10 | 1.5-6 | Non-Insulate terminal |
HS-101 | 18-8 | 1.5-10 | Non-Insulate terminal |
HS-04WFL | 20-12 | 0.5-4 | Wire-end Ferrules |
HS-03B | 18-10 | 1.5-6 | Non-insulated tabs and receptacles |
C-C7 | CU/AL DIA.7mm | Cutting Terminal |