Dual Air Caulking Gun, 490ml 10:1 Dual Pneumatic Caulking Gun, Spray Caulking Gun, Air Caulking Gun - 490ml 10:1

Name:490ml 10:1 Dual Air Caulking Gun, Dual Pneumatic Caulking Gun, Spray Caulking Gun, Air Caulking Gun

Description:
Item no.: CGA600-1-1 two-component Pneumatic caulking gun
Cartridge Capacity: 750ml * 750ml two-component cartridges
Material: Aluminum & Iron materials
Net Weight: 3.2kgs / piece

Features:

• Nominal Thrust 1500 lbs.
• True Adjustable Air Regulator - 110 PSI Maximum
• Support Discs - Secure and Accurate Cartridge Fit
• Instant Dump Valve
• Reverse Air - Plunger Return with Trigger
• All Component Replaceable Parts
• Air Hose Connector Included

SAFETY:
This applicator is designed for heavy duty cycles over extended operating periods. As Compressed air is used as the powder source, operator fatigue is minimal, but it must be remembered that compressed air CAN BE DANGEROUS when used incorrectly. The user should take time to read and understand these operating instructions fully prior to using the applicator. Any modifications to the applicator made by the user will void the warranty and could cause personal injury.

Application:

In-line double push rods, prevent cartridge tilt and twist (F1)
Instant Dump Valve (F2)
True Adjustable Air Regulator – 8 bar Maximum (F3)
Air Hose Connector Included (F4)
Reverse Air - Plunger Return with Trigger (F5)
The hole for additional shoulder belt to share the weight (F6)
Easy ratio conversion (200ml*200ml, 300ml*300ml, 300ml*150ml, 600ml*150ml, 750ml*75ml 600ml*300ml, 600ml*600ml, 750ml*750ml and so on. )

CONNECTING
Check the supply pressure. For optimum performance the supply pressure must be greater than 100 PSI and less than 115 PSI. The applicator will work at lower supply pressures, but flow rates could be reduced and may vary. Connect the applicator to a suitable compressed air source using the fitting supplied, or with a suitable fitting. All applicators are fitted with a male 1/4” NPT thread.