1 diamond wire drawing dies
2 superior quality and performance
3 good wear resistance
4 good finish surface
Port: Beijing, Shanghai, HK
Minimum Order Quantity: 1 Piece/Pieces
Supply Ability: 500 Piece/Pieces per Month
Payment Terms: L/C,T/T,Western Union
Contact Supplier
Packaging Detail: regular box plus clear bubble wraps
Delivery Detail: 10-15 days
Diamond wire drawing dies are polymerized with synthetic diamond single crystal, adding a small amount of silicon, titanium and other binding agents, under conditions of high temperature and high pressure.
Diamond wire drawing dies advantage
good wear resistance, uniform bore, strong impact and high wire drawing efficiency, and the price is much cheaper than natural diamond wire drawing die. Diamond wire drawing dies are widely used in wire drawing industry. Used for aluminum wire, copper wire, stainless steel wire, alloy wire etc..
Diamond wire drawing dies specification
size range | tolerance | casing ref. Size | ||
| inch | mm | mm | mm | |
| ≤0.0008 | ≤0.020 | 0.0006 | Φ25×6 | |
| 0.0008 – 0.0019 | 0.020 – 0.050 | 0.0006 | Φ25×8 | |
| 0.0020 – 0.0039 | 0.051 – 0.100 | 0.001 | Φ25×8 | |
| 0.0040 – 0.0079 | 0.101 – 0.200 | 0.001 | Φ25×8 | |
| 0.0080 – 0.0199 | 0.201 – 0.500 | 0.0015 | Φ25×8 | |
| 0.0200 – 0.0399 | 0.501 – 1.000 | 0.002 | Φ25×10 | |
| 0.0400 – 0.0590 | 1.001 – 1.500 | 0.0025 | Φ25×12 | |
| 0.0591 – 0.0866 | 1.501 – 2.200 | 0.003 | Φ25×14 | |
0.0867 – 0.1299 | 2.201 – 3.300 | 0.004 | Φ28×16 Φ30×16 | |
0.1300 – 0.1810 | 3.302 – 4.600 | 0.005 | Φ28×18 Φ30×18 | |
| 0.1811 – 0.2164 | 4.601 – 5.500 | 0.006 | Φ43×26 | |
| 0.2165 – 0.3150 | 5.501 – 8.000 | 0.008 | Φ43×30 | |
| soft wire | hard wire | |
| entrance angle | 70+/-20 | 60+/-20 |
| reduction angle | 16+/-2 | 14+/-2 |
| bearing length | 25-50% | 40-80% |
| exit angle | 15+/-5 | 15+/-5 |
| back relief angle | 50+/-20 | 50+/-20 |
soft wire: copper wire, aluminum wire, brass wire, gold wire etc.
hard wire: stainless steel wire, copper plated steel wire, tungsten wire etc.
Diamond wire drawing dies pictures as below
Model No.: 0131
Features: suitable for Concrete and Asphalt,stone,brick .faster and smooth cutting;low electricity;longer life;low price;size:10''-24''
Model No.: CORB
Features: suitable for wet &dry ,stone,Brick, Block and Masonry,concrete,asphalt,fast and smooth cutting,low electricity& price.3''-4''
Model No.: CNMN 12T608
Features: High Efficiency
Low Cost
Model No.: RNMN 12T600
Features: High Efficiency
Low Cost
Model No.: spray nozzle
Features: Plastic Dismantling Nozzle, Spray nozzle, Plastic Nozzle, Cone Nozzle, Quick Jet Nozzle, Flat Spray Nozzle, Washing Nozzle
Model No.:
Features: Upper and Lower Kelly Valve
Model No.: 0141
Features: suitable for Concrete and Asphalt,stone,brick .faster and smooth cutting;low electricity;longer life;low price;size:10''-80''
Model No.: VCGW,CNMG,DNMG,TNMG,WNMA,TNMA,SPG...
Features: PCD insert,Diamond insert,CBN insert
SNMN,SCMN,CNMN,DNMN,TNMN,VNMN,WNMN,RBMN,VCMT,VNMA,DCMT,DCMT,SPGN,SNGN 120404/08/12,1604
Model No.: 0142
Features: suitable for Concrete and Asphalt,stone,brick .faster and smooth cutting;low electricity;longer life;low price;size:10''-80''
Model No.: blade for multi-rasp plane
Features: Blade For Block Plane
1.Replacement plane blade ,
2.Used for Block Plane,
3.Punched from the whole 65 MN steel.
Model No.: GTQ-5000
Features: GTQ-5000 procision cutting machine
Model No.: CBSB
Features: suitable for stone, granite.marble,concrete,asphalt,ceramic,
fast and smooth cutting,low electricity,low price.size: