Diamond Segment for Marble
1. High efficient cutting
2. Long cutting life
3. Good quality
4. For blade from 1.6mm to 3.5mm
Port: Xiamen
Minimum Order Quantity: 1 Set/Sets negotiable
Supply Ability: 5000 Piece/Pieces per Day according to customer requirement
Payment Terms: L/C,T/T,Western Union,Paypal
Contact SupplierPackaging Detail: carton box inside, wooden box or carton box outside with EPE
Delivery Detail: 7 to 15 days based on quantity of order
Diamond Segment for Marble Gangsaw Cutting
Gang saw segments are one of the most advanced tools to cut large size blocks which cannot be sawn on block cutters due to limitation of depth of cutting.
We provide gang saw segments from 60 to 100 blades for one set of blade in one machine.
We make segments for 3.5 - 1.6 mm thickness blades, provide a height of 8 mm with no base, 10 mm height segment also can be provided as required.
Our segments are designed so as to give even cut in the thickness in slabs with no variations and chatter marks. We specialize in cutting from most dense marble to softest marble.
Features with:
High efficiency, good sharpness of segment.
Long lifespan of segment.
Good plainness for less cost in polishing.
Small cutting slot as your required.
Precise processing.
Dimension of Segment(MM) | Dimension of Blade | ||
Length | Width | Height | (MM) |
20 | 3.1/2.7 | 7/8/10 | 180*1.6 |
20 | 3.5/3.1 | 7/810 | 180*2.0 |
20 | 4.0/3.6 | 7/810 | 180*2.5 |
20 | 4.5/4.1 | 7/8/10 | 180*3.0 |
20 | 5.0/4.6 | 7/8/10 | 180*3.5 |
Low speed cutting | ||||
Length of Stroke (mm) | 360 | 400 | 500 | 600 |
Strokes/min | 80 | 80 | 80 | 80 |
Blade velocity, m/s | 0.96 | 1.07 | 1.33 | 1.6 |
Power per blade | Cutting depth, cm/h | Cooling water L/M | Warp | Tensile force, KN |
1.0-1.5kw 20-30 tooth | 12-20 Marble | 7-8L | 1.5-3.5 | 80-90 |
1.5-2.0kw 30-45 tooth | 10-25 Limestone | 7-8L | 1.5-3.5 | 80-90 |
High speed cutting | ||||
Length of Stroke (mm) | 500 | 540 | 700 | 750 |
Strokes/min | 120 | 120 | 120 | 120 |
Blade velocity, m/s | 2 | 2.16 | 2.45 | 2.63 |
Power per blade | Cutting depth, cm/h | Cooling water (L/M) | Warp | Tensile force, KN |
1.5-2.2KW 20-30 tooth | 17-35 Marble | 8-9L | 1.8-4 | 90-100 |
2.0-2.8KW 30-45 tooth | 22-35 Limestone | 8-9L | 1.8-4 | 90-100 |