Caulking Applicator,Manual Caulking Gun, 825ml 10:1 Dispensing Gun for Chemical and Anchoring Resin Expoies - 825ml 10:1

Name: 825ml 10:1 Caulking Applicator, Caulking Gun, Dispensing Gun for Chemical and Anchoring Resin Expoies

Item no.: CG-825-10-1

Cartridge: two-component

Capacity: 825ml ( 10:1 )

Material: Reinforced Nylon / Iron frame

Stainless Steel Rod

Weight: 1.76kg / piece

Package:10pcs / carton

Inner packing: 385mm×200mm×115mm

Outer packing: 630mm×385mm×410mm

We're the leading professional manufacturer who specializes in producing various dispensing guns, cartridges and mixing tips, blowing pumps and plastic sleeves which are widely used for glues, Acylic adhesives, silicone sealants and expoies in construction, waterproof, tunne&bridge, industry and electronic fileds.

How to use sealant gun?

Instructions:

1, Open the swfit of handle and then pull the rack to reach the maximum.
2, Put into two-companent impression material cartridge.

3, Promote the trigger to make the impression material come out smoothly from the cartidge
4, After using, put the rack back to the original location.
5, Remove the cartridge, then to repeat the above operation.

Advantage:

There are 3 strong- points of our plastic sealant guns:

1. Low cost: Life duration is 5 times more than iron caulking gun.

2. high-efficiency: The force is up to 270Kg-300kg and save your strength 5 times than common air caulking gun.

3. Brand image: Not only our service of high-quality adhesive, but also high-quality concerned tools, our products are designed it.

4. Non-drip, push the trigger forward to release the piston rod and to remove the piston pressure---the rod can be moved back and forth without manual release of brake.